!
!-------------------------- Default Units for Model ---------------------------!
!
!
defaults units  &
   length = mm  &
   angle = deg  &
   force = newton  &
   mass = kg  &
   time = sec
!
defaults units  &
   coordinate_system_type = cartesian  &
   orientation_type = body313
!
!------------------------ Default Attributes for Model ------------------------!
!
!
defaults attributes  &
   inheritance = bottom_up  &
   icon_visibility = off  &
   grid_visibility = off  &
   size_of_icons = 20.0  &
   spacing_for_grid = 1000.0
!
!------------------------------ Adams/View Model ------------------------------!
!
!
model create  &
   model_name = egpp
!
model attributes  &
   model_name = egpp  &
   size_of_icons = 20.0
!
view erase
!
!--------------------------------- Materials ----------------------------------!
!
!
material create  &
   material_name = .egpp.steel  &
   adams_id = 1  &
   youngs_modulus = 2.07E+005  &
   poissons_ratio = 0.29  &
   density = 7.801E-006
!
!-------------------------------- Rigid Parts ---------------------------------!
!
! Create parts and their dependent markers and graphics
!
!----------------------------------- ground -----------------------------------!
!
!
! ****** Ground Part ******
!
defaults model  &
   part_name = ground
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .egpp.ground.MARKER_93  &
   adams_id = 93  &
   location = 483.33, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_94  &
   adams_id = 94  &
   location = -16.67, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_80  &
   adams_id = 80  &
   location = -135.7, 0.0, 4.1  &
   orientation = 270.0d, 90.0d, 91.5800279903d
!
marker attributes  &
   marker_name = .egpp.ground.MARKER_80  &
   visibility = on
!
marker create  &
   marker_name = .egpp.ground.MARKER_27  &
   adams_id = 27  &
   location = -135.7, 0.0, -37.9  &
   orientation = 270.0d, 90.0d, 90.0d
!
marker attributes  &
   marker_name = .egpp.ground.MARKER_27  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.ground.MARKER_82  &
   adams_id = 82  &
   location = -75.7, 0.0, -37.9  &
   orientation = 90.0d, 90.0d, 270.0d
!
marker attributes  &
   marker_name = .egpp.ground.MARKER_82  &
   visibility = on
!
marker create  &
   marker_name = .egpp.ground.MARKER_31  &
   adams_id = 31  &
   location = -16.67, -33.5, 0.0  &
   orientation = 90.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.ground.MARKER_31  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.ground.repeng3  &
   adams_id = 70  &
   location = -33.56, -11.17, 0.0  &
   orientation = 127.1d, 90.0d, 180.0d
!
marker attributes  &
   marker_name = .egpp.ground.repeng3  &
   visibility = on
!
marker create  &
   marker_name = .egpp.ground.MARKER_97  &
   adams_id = 97  &
   location = -16.67, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_87  &
   adams_id = 87  &
   location = -42.0, 0.0, 0.0  &
   orientation = 358.6263919256d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.ground.MARKER_87  &
   visibility = on
!
marker create  &
   marker_name = .egpp.ground.marqeureng1  &
   adams_id = 63  &
   location = -135.7, 0.0, -9.1  &
   orientation = 0.0d, 90.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.ground.marqeureng1  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.ground.MARKER_116  &
   adams_id = 116  &
   location = -16.67, 0.0, 60.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_62  &
   adams_id = 62  &
   location = 483.3, 0.0, 60.0  &
   orientation = 90.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.ground.MARKER_62  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.ground.MARKER_84  &
   adams_id = 84  &
   location = -42.0, 0.0, -30.0  &
   orientation = 0.0d, 180.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.ground.MARKER_84  &
   visibility = on
!
marker create  &
   marker_name = .egpp.ground.marqeng2  &
   adams_id = 85  &
   location = -75.7, 0.0, -30.0  &
   orientation = 180.0d, 90.0d, 180.0d
!
marker attributes  &
   marker_name = .egpp.ground.marqeng2  &
   visibility = on
!
marker create  &
   marker_name = .egpp.ground.MARKER_76  &
   adams_id = 76  &
   location = -16.67, 0.0, 75.0  &
   orientation = 171.4072280207d, 32.1161972219d, 187.8617215846d
!
marker attributes  &
   marker_name = .egpp.ground.MARKER_76  &
   visibility = on
!
marker create  &
   marker_name = .egpp.ground.MARKER_118  &
   adams_id = 118  &
   location = -16.67, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_98  &
   adams_id = 98  &
   location = 483.33, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_119  &
   adams_id = 119  &
   location = 483.33, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_100  &
   adams_id = 100  &
   location = -16.67, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_101  &
   adams_id = 101  &
   location = 483.33, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_120  &
   adams_id = 120  &
   location = -16.67, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_103  &
   adams_id = 103  &
   location = -16.67, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_104  &
   adams_id = 104  &
   location = 483.33, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_121  &
   adams_id = 121  &
   location = 483.33, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_106  &
   adams_id = 106  &
   location = -16.67, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_107  &
   adams_id = 107  &
   location = 483.33, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_122  &
   adams_id = 122  &
   location = -16.67, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_109  &
   adams_id = 109  &
   location = -16.67, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_110  &
   adams_id = 110  &
   location = 483.33, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_123  &
   adams_id = 123  &
   location = 483.33, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_112  &
   adams_id = 112  &
   location = -16.67, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_113  &
   adams_id = 113  &
   location = 483.33, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_128  &
   adams_id = 128  &
   location = -16.67, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_125  &
   adams_id = 125  &
   location = -16.67, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_126  &
   adams_id = 126  &
   location = 483.33, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.ground.MARKER_129  &
   adams_id = 129  &
   location = 483.33, 0.0, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
part create rigid_body mass_properties  &
   part_name = .egpp.ground  &
   material_type = .egpp.steel
!
! ****** Points for current part ******
!
point create  &
   point_name = .egpp.ground.POINT_1  &
   location = -16.67, -33.5, 0.0
!
point attributes  &
   point_name = .egpp.ground.POINT_1  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.POINT_5  &
   location = -42.0, 0.0, 0.0
!
point attributes  &
   point_name = .egpp.ground.POINT_5  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.POINT_5_2  &
   location = -42.0, 0.0, 15.0
!
point attributes  &
   point_name = .egpp.ground.POINT_5_2  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.F  &
   location = -42.0, 0.0, -30.0
!
point attributes  &
   point_name = .egpp.ground.F  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.D  &
   location = -75.7, 0.0, -37.9
!
point attributes  &
   point_name = .egpp.ground.D  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.D1  &
   location = -65.7, 0.0, -37.9
!
point attributes  &
   point_name = .egpp.ground.D1  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.C1  &
   location = -135.7, 0.0, -37.9
!
point attributes  &
   point_name = .egpp.ground.C1  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.C  &
   location = -145.7, 0.0, -37.9
!
point attributes  &
   point_name = .egpp.ground.C  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.B1  &
   location = -135.7, 0.0, 4.1
!
point attributes  &
   point_name = .egpp.ground.B1  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.B  &
   location = -145.7, 0.0, 4.1
!
point attributes  &
   point_name = .egpp.ground.B  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.A  &
   location = -350.0, 0.0, 4.1
!
point attributes  &
   point_name = .egpp.ground.A  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.P2  &
   location = 483.33, 0.0, 75.0
!
point attributes  &
   point_name = .egpp.ground.P2  &
   visibility = on
!
point create  &
   point_name = .egpp.ground.N  &
   location = -16.67, -67.0, 60.0
!
point attributes  &
   point_name = .egpp.ground.N  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.O  &
   location = -16.67, 0.0, 60.0
!
point attributes  &
   point_name = .egpp.ground.O  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.P  &
   location = -16.67, 0.0, 75.0
!
point attributes  &
   point_name = .egpp.ground.P  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.PD  &
   location = 483.3, 0.0, 60.0
!
point attributes  &
   point_name = .egpp.ground.PD  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.PD2  &
   location = 483.3, -67.0, 60.0
!
point attributes  &
   point_name = .egpp.ground.PD2  &
   visibility = on  &
   size_of_icons = 20.0
!
point create  &
   point_name = .egpp.ground.pointeng3  &
   location = -33.56, -11.17, 0.0
!
point attributes  &
   point_name = .egpp.ground.pointeng3  &
   visibility = on
!
point create  &
   point_name = .egpp.ground.pointeng2  &
   location = -70.7, 0.0, -32.903
!
point attributes  &
   point_name = .egpp.ground.pointeng2  &
   visibility = on
!
point create  &
   point_name = .egpp.ground.POINT_35  &
   location = -75.7, 0.0, -30.0
!
point attributes  &
   point_name = .egpp.ground.POINT_35  &
   visibility = on
!
! ****** Graphics for current part ******
!
part attributes  &
   part_name = .egpp.ground  &
   visibility = on  &
   name_visibility = off  &
   size_of_icons = 20.0
!
!------------------------------------ axe6 ------------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
part create rigid_body name_and_position  &
   part_name = .egpp.axe6  &
   adams_id = 2  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.axe6
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .egpp.axe6.MARKER_1  &
   adams_id = 1  &
   location = -16.67, -33.5, 0.0  &
   orientation = 90.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.axe6.MARKER_1  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe6.cm  &
   adams_id = 39  &
   location = -16.67, -33.1127651067, 9.982220743  &
   orientation = 0.0d, 7.8551209307d, 0.0d
!
marker attributes  &
   marker_name = .egpp.axe6.cm  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe6.MARKER_2  &
   adams_id = 2  &
   location = -16.67, -33.5, 15.0  &
   orientation = 90.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.axe6.MARKER_2  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe6.MARKER_90  &
   adams_id = 90  &
   location = -16.67, -12.0, 47.5  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.axe6.MARKER_30  &
   adams_id = 30  &
   location = -16.67, -33.5, 0.0  &
   orientation = 90.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.axe6.MARKER_30  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe6.MARKER_88  &
   adams_id = 88  &
   location = -16.67, -33.5, 45.0  &
   orientation = 90.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.axe6.MARKER_89  &
   adams_id = 89  &
   location = -16.67, -12.0, 45.0  &
   orientation = 90.0d, 0.0d, 0.0d
!
part create rigid_body mass_properties  &
   part_name = .egpp.axe6  &
   material_type = .egpp.steel
!
! ****** Points for current part ******
!
point create  &
   point_name = .egpp.axe6.pointbiellebas  &
   location = -16.67, -33.5, 45.0
!
point attributes  &
   point_name = .egpp.axe6.pointbiellebas  &
   visibility = on
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .egpp.axe6.CYLINDER_2  &
   adams_id = 2  &
   center_marker = .egpp.axe6.MARKER_1  &
   angle_extent = 360.0  &
   length = 15.0  &
   radius = 28.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape cylinder  &
   cylinder_name = .egpp.axe6.CYLINDER_4  &
   adams_id = 4  &
   center_marker = .egpp.axe6.MARKER_2  &
   angle_extent = 360.0  &
   length = 27.5  &
   radius = 5.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape link  &
   link_name = .egpp.axe6.LINK_35  &
   i_marker = .egpp.axe6.MARKER_88  &
   j_marker = .egpp.axe6.MARKER_89  &
   width = 10.0  &
   depth = 5.0
!
geometry attributes  &
   geometry_name = .egpp.axe6.LINK_35  &
   color = YELLOW
!
part attributes  &
   part_name = .egpp.axe6  &
   color = MAGENTA  &
   visibility = on  &
   name_visibility = off  &
   size_of_icons = 20.0
!
!------------------------------------ axe5 ------------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
part create rigid_body name_and_position  &
   part_name = .egpp.axe5  &
   adams_id = 3  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.axe5
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .egpp.axe5.MARKER_3  &
   adams_id = 3  &
   location = -42.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.axe5.MARKER_3  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe5.cm  &
   adams_id = 40  &
   location = -42.0, 0.0, -19.5526952412  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.axe5.cm  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe5.MARKER_4  &
   adams_id = 4  &
   location = -42.0, 0.0, 0.0  &
   orientation = 180.0d, 180.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.axe5.MARKER_4  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe5.MARKER_5  &
   adams_id = 5  &
   location = -42.0, 0.0, -30.0  &
   orientation = 180.0d, 180.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.axe5.MARKER_5  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe5.MARKER_86  &
   adams_id = 86  &
   location = -42.0, 0.0, 0.0  &
   orientation = 358.6263919256d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.axe5.MARKER_86  &
   visibility = on
!
marker create  &
   marker_name = .egpp.axe5.MARKER_83  &
   adams_id = 83  &
   location = -42.0, 0.0, -30.0  &
   orientation = 0.0d, 180.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.axe5.MARKER_83  &
   visibility = on
!
part create rigid_body mass_properties  &
   part_name = .egpp.axe5  &
   material_type = .egpp.steel
!
! ****** Points for current part ******
!
point create  &
   point_name = .egpp.axe5.F1  &
   location = -42.0, 0.0, -40.0
!
point attributes  &
   point_name = .egpp.axe5.F1  &
   visibility = on  &
   size_of_icons = 20.0
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .egpp.axe5.CYLINDER_5  &
   adams_id = 5  &
   center_marker = .egpp.axe5.MARKER_3  &
   angle_extent = 360.0  &
   length = 15.0  &
   radius = 14.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape cylinder  &
   cylinder_name = .egpp.axe5.CYLINDER_6  &
   adams_id = 6  &
   center_marker = .egpp.axe5.MARKER_4  &
   angle_extent = 360.0  &
   length = 30.0  &
   radius = 10.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape frustum  &
   frustum_name = .egpp.axe5.FRUSTUM_8  &
   adams_id = 8  &
   center_marker = .egpp.axe5.MARKER_5  &
   angle_extent = 360.0  &
   length = 10.0  &
   top_radius = 16.3  &
   bottom_radius = 33.7  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
part attributes  &
   part_name = .egpp.axe5  &
   color = RED  &
   visibility = on  &
   name_visibility = off  &
   size_of_icons = 20.0
!
!------------------------------------ axe4 ------------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
part create rigid_body name_and_position  &
   part_name = .egpp.axe4  &
   adams_id = 4  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.axe4
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .egpp.axe4.marqueureng2  &
   adams_id = 6  &
   location = -75.7, 0.0, -37.9  &
   orientation = 90.0d, 90.0d, 270.0d
!
marker attributes  &
   marker_name = .egpp.axe4.marqueureng2  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe4.cm  &
   adams_id = 41  &
   location = -133.2682312046, 0.0, -37.9  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.axe4.cm  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe4.MARKER_7  &
   adams_id = 7  &
   location = -75.7, 0.0, -37.9  &
   orientation = 270.0d, 90.0d, 90.0d
!
marker attributes  &
   marker_name = .egpp.axe4.MARKER_7  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe4.MARKER_8  &
   adams_id = 8  &
   location = -135.7, 0.0, -37.9  &
   orientation = 270.0d, 90.0d, 90.0d
!
marker attributes  &
   marker_name = .egpp.axe4.MARKER_8  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe4.MARKER_26  &
   adams_id = 26  &
   location = -135.7, 0.0, -37.9  &
   orientation = 270.0d, 90.0d, 90.0d
!
marker attributes  &
   marker_name = .egpp.axe4.MARKER_26  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe4.MARKER_81  &
   adams_id = 81  &
   location = -75.7, 0.0, -37.9  &
   orientation = 90.0d, 90.0d, 270.0d
!
marker attributes  &
   marker_name = .egpp.axe4.MARKER_81  &
   visibility = on
!
part create rigid_body mass_properties  &
   part_name = .egpp.axe4  &
   material_type = .egpp.steel
!
! ****** Graphics for current part ******
!
geometry create shape frustum  &
   frustum_name = .egpp.axe4.FRUSTUM_9  &
   adams_id = 9  &
   center_marker = .egpp.axe4.marqueureng2  &
   angle_extent = 360.0  &
   length = 10.0  &
   top_radius = 2.1  &
   bottom_radius = 7.9  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape cylinder  &
   cylinder_name = .egpp.axe4.CYLINDER_10  &
   adams_id = 10  &
   center_marker = .egpp.axe4.MARKER_7  &
   angle_extent = 360.0  &
   length = 60.0  &
   radius = 5.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape cylinder  &
   cylinder_name = .egpp.axe4.CYLINDER_11  &
   adams_id = 11  &
   center_marker = .egpp.axe4.MARKER_8  &
   angle_extent = 360.0  &
   length = 10.0  &
   radius = 28.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
part attributes  &
   part_name = .egpp.axe4  &
   color = GREEN  &
   visibility = on  &
   name_visibility = off  &
   size_of_icons = 20.0
!
!------------------------------------ axe3 ------------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
part create rigid_body name_and_position  &
   part_name = .egpp.axe3  &
   adams_id = 5  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.axe3
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .egpp.axe3.MARKER_9  &
   adams_id = 9  &
   location = -135.7, 0.0, 4.1  &
   orientation = 270.0d, 90.0d, 90.0d
!
marker attributes  &
   marker_name = .egpp.axe3.MARKER_9  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe3.cm  &
   adams_id = 42  &
   location = -238.3207513417, 0.0, 4.1  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.axe3.cm  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe3.MARKER_10  &
   adams_id = 10  &
   location = -145.7, 0.0, 4.1  &
   orientation = 270.0d, 90.0d, 90.0d
!
marker attributes  &
   marker_name = .egpp.axe3.MARKER_10  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe3.MARKER_79  &
   adams_id = 79  &
   location = -135.7, 0.0, 4.1  &
   orientation = 270.0d, 90.0d, 91.5800279903d
!
marker attributes  &
   marker_name = .egpp.axe3.MARKER_79  &
   visibility = on
!
part create rigid_body mass_properties  &
   part_name = .egpp.axe3  &
   material_type = .egpp.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .egpp.axe3.CYLINDER_13  &
   adams_id = 13  &
   center_marker = .egpp.axe3.MARKER_9  &
   angle_extent = 360.0  &
   length = 10.0  &
   radius = 14.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape cylinder  &
   cylinder_name = .egpp.axe3.CYLINDER_14  &
   adams_id = 14  &
   center_marker = .egpp.axe3.MARKER_10  &
   angle_extent = 360.0  &
   length = 204.0  &
   radius = 10.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
part attributes  &
   part_name = .egpp.axe3  &
   color = CYAN  &
   visibility = on  &
   name_visibility = off  &
   size_of_icons = 20.0
!
!----------------------------------- bielle -----------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
part create rigid_body name_and_position  &
   part_name = .egpp.bielle  &
   adams_id = 6  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.bielle
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .egpp.bielle.cm  &
   adams_id = 43  &
   location = -16.67, -22.25, 45.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.bielle.cm  &
   visibility = on  &
   size_of_icons = 20.0
!
part create rigid_body mass_properties  &
   part_name = .egpp.bielle  &
   material_type = .egpp.steel
!
part attributes  &
   part_name = .egpp.bielle  &
   active = off  &
   color = CYAN  &
   visibility = on  &
   name_visibility = off  &
   size_of_icons = 20.0
!
!------------------------------------ axe8 ------------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
part create rigid_body name_and_position  &
   part_name = .egpp.axe8  &
   adams_id = 7  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.axe8
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .egpp.axe8.MARKER_91  &
   adams_id = 91  &
   location = -16.67, -12.0, 47.5  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.axe8.MARKER_13  &
   adams_id = 13  &
   location = -16.67, -12.0, 47.5  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.axe8.MARKER_13  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe8.cm  &
   adams_id = 44  &
   location = -16.67, -11.2819698001, 57.5327642489  &
   orientation = 180.0d, 12.8249235001d, 180.0d
!
marker attributes  &
   marker_name = .egpp.axe8.cm  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe8.MARKER_15  &
   adams_id = 15  &
   location = -21.67, -18.5, 55.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.axe8.MARKER_15  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.axe8.MARKER_67  &
   adams_id = 67  &
   location = -16.67, -12.0, 60.0  &
   orientation = 180.0d, 90.0d, 90.0d
!
marker attributes  &
   marker_name = .egpp.axe8.MARKER_67  &
   visibility = on
!
part create rigid_body mass_properties  &
   part_name = .egpp.axe8  &
   material_type = .egpp.steel
!
! ****** Points for current part ******
!
point create  &
   point_name = .egpp.axe8.pointglissiere  &
   location = -16.67, -11.0, 60.0
!
point attributes  &
   point_name = .egpp.axe8.pointglissiere  &
   visibility = on
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .egpp.axe8.CYLINDER_19  &
   adams_id = 19  &
   center_marker = .egpp.axe8.MARKER_13  &
   angle_extent = 360.0  &
   length = 7.5  &
   radius = 5.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape block  &
   block_name = .egpp.axe8.BOX_21  &
   adams_id = 21  &
   corner_marker = .egpp.axe8.MARKER_15  &
   diag_corner_coords = 10.0, 15.0, 10.0
!
geometry attributes  &
   geometry_name = .egpp.axe8.BOX_21  &
   color = BLUE
!
part attributes  &
   part_name = .egpp.axe8  &
   color = BLUE  &
   visibility = on  &
   name_visibility = off  &
   size_of_icons = 20.0
!
!---------------------------------- egpart1 -----------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
part create rigid_body name_and_position  &
   part_name = .egpp.egpart1  &
   adams_id = 9  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.egpart1
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .egpp.egpart1.MARKER_16  &
   adams_id = 16  &
   location = -16.67, -67.0, 60.0  &
   orientation = 180.0d, 90.0d, 180.0d
!
marker attributes  &
   marker_name = .egpp.egpart1.MARKER_16  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.egpart1.MARKER_92  &
   adams_id = 92  &
   location = -16.67, 0.0, 75.0  &
   orientation = 218.5049640767d, 90.0d, 90.0d
!
marker create  &
   marker_name = .egpp.egpart1.cm  &
   adams_id = 46  &
   location = -149.905413257, 163.6308465093, 73.1525509331  &
   orientation = 309.0537823293d, 27.2193746779d, 87.9729185143d
!
marker attributes  &
   marker_name = .egpp.egpart1.cm  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.egpart1.MARKER_17  &
   adams_id = 17  &
   location = -16.67, 0.0, 60.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.egpart1.MARKER_17  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.egpart1.MARKER_95  &
   adams_id = 95  &
   location = -321.3938, 383.0222, 75.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.egpart1.MARKER_66  &
   adams_id = 66  &
   location = -16.67, -11.0, 60.0  &
   orientation = 180.0d, 90.0d, 90.0d
!
marker attributes  &
   marker_name = .egpp.egpart1.MARKER_66  &
   visibility = on
!
marker create  &
   marker_name = .egpp.egpart1.MARKER_115  &
   adams_id = 115  &
   location = -16.67, 0.0, 60.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .egpp.egpart1.MARKER_58  &
   adams_id = 58  &
   location = -16.67, -67.0, 60.0  &
   orientation = 270.0d, 90.0d, 90.0d
!
marker attributes  &
   marker_name = .egpp.egpart1.MARKER_58  &
   visibility = on  &
   size_of_icons = 20.0
!
part create rigid_body mass_properties  &
   part_name = .egpp.egpart1  &
   material_type = .egpp.steel
!
! ****** Points for current part ******
!
point create  &
   point_name = .egpp.egpart1.Q  &
   location = -321.3938, 383.0222, 75.0
!
point attributes  &
   point_name = .egpp.egpart1.Q  &
   visibility = on
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .egpp.egpart1.CYLINDER_23  &
   adams_id = 23  &
   center_marker = .egpp.egpart1.MARKER_16  &
   angle_extent = 360.0  &
   length = 65.0  &
   radius = 4.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape cylinder  &
   cylinder_name = .egpp.egpart1.CYLINDER_24  &
   adams_id = 24  &
   center_marker = .egpp.egpart1.MARKER_17  &
   angle_extent = 360.0  &
   length = 19.1  &
   radius = 4.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape cylinder  &
   cylinder_name = .egpp.egpart1.CYLINDER_35  &
   adams_id = 35  &
   center_marker = .egpp.egpart1.MARKER_92  &
   angle_extent = 360.0  &
   length = 500.0  &
   radius = 4.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
part attributes  &
   part_name = .egpp.egpart1  &
   color = GREEN  &
   visibility = on  &
   name_visibility = off  &
   size_of_icons = 20.0
!
!---------------------------------- egpart2 -----------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
part create rigid_body name_and_position  &
   part_name = .egpp.egpart2  &
   adams_id = 10  &
   location = 250.0, 0.0, 0.0  &
   orientation = 0.0d, 30.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.egpart2
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .egpp.egpart2.MARKER_16  &
   adams_id = 19  &
   location = 233.3, -28.0237020536, 85.4615242271  &
   orientation = 180.0d, 120.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.egpart2.MARKER_16  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.egpart2.cm  &
   adams_id = 20  &
   location = 95.7662674982, 175.2249317597, -16.696871574  &
   orientation = 239.547443058d, 23.0128357591d, 164.1812132104d
!
marker attributes  &
   marker_name = .egpp.egpart2.cm  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.egpart2.MARKER_17  &
   adams_id = 21  &
   location = 233.3, 30.0, 51.9615242271  &
   orientation = 180.0d, 30.0d, 180.0d
!
marker attributes  &
   marker_name = .egpp.egpart2.MARKER_17  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.egpart2.MARKER_131  &
   adams_id = 131  &
   location = 233.33, 37.5, 64.9519052838  &
   orientation = 224.0953139069d, 112.5210117135d, 200.3605753272d
!
marker create  &
   marker_name = .egpp.egpart2.MARKER_59  &
   adams_id = 59  &
   location = 233.3, -28.0237020536, 85.4615242271  &
   orientation = 180.0d, 30.0d, 270.0d
!
marker attributes  &
   marker_name = .egpp.egpart2.MARKER_59  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.egpart2.MARKER_61  &
   adams_id = 61  &
   location = 233.3, 30.0, 51.9615242271  &
   orientation = 180.0d, 30.0d, 270.0d
!
marker attributes  &
   marker_name = .egpp.egpart2.MARKER_61  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.egpart2.MARKER_77  &
   adams_id = 77  &
   location = 233.3, 39.55, 68.5026094393  &
   orientation = 174.8348136481d, 61.9226116665d, 183.0046799494d
!
marker attributes  &
   marker_name = .egpp.egpart2.MARKER_77  &
   visibility = on
!
marker create  &
   marker_name = .egpp.egpart2.MARKER_130  &
   adams_id = 130  &
   location = -88.0638, 369.2069554134, -126.5591947162  &
   orientation = 180.0d, 30.0d, 180.0d
!
part create rigid_body mass_properties  &
   part_name = .egpp.egpart2  &
   material_type = .egpp.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .egpp.egpart2.CYLINDER_23  &
   adams_id = 26  &
   center_marker = .egpp.egpart2.MARKER_16  &
   angle_extent = 360.0  &
   length = 65.0  &
   radius = 4.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape cylinder  &
   cylinder_name = .egpp.egpart2.CYLINDER_24  &
   adams_id = 27  &
   center_marker = .egpp.egpart2.MARKER_17  &
   angle_extent = 360.0  &
   length = 19.1  &
   radius = 4.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape cylinder  &
   cylinder_name = .egpp.egpart2.CYLINDER_40  &
   adams_id = 40  &
   center_marker = .egpp.egpart2.MARKER_131  &
   angle_extent = 360.0  &
   length = 500.0  &
   radius = 4.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
part attributes  &
   part_name = .egpp.egpart2  &
   color = GREEN  &
   visibility = on  &
   name_visibility = off  &
   size_of_icons = 20.0
!
!---------------------------------- PART_11 -----------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
part create rigid_body name_and_position  &
   part_name = .egpp.PART_11  &
   adams_id = 11  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.PART_11
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .egpp.PART_11.MARKER_23  &
   adams_id = 23  &
   location = -16.67, -67.0, 60.0  &
   orientation = 90.0d, 90.0d, 270.0d
!
marker attributes  &
   marker_name = .egpp.PART_11.MARKER_23  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.PART_11.cm  &
   adams_id = 47  &
   location = 233.33, -67.0, 60.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.PART_11.cm  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.PART_11.MARKER_57  &
   adams_id = 57  &
   location = -16.67, -67.0, 60.0  &
   orientation = 270.0d, 90.0d, 90.0d
!
marker attributes  &
   marker_name = .egpp.PART_11.MARKER_57  &
   visibility = on  &
   size_of_icons = 20.0
!
marker create  &
   marker_name = .egpp.PART_11.MARKER_60  &
   adams_id = 60  &
   location = 483.3, -67.0, 60.0  &
   orientation = 90.0d, 0.0d, 0.0d
!
marker attributes  &
   marker_name = .egpp.PART_11.MARKER_60  &
   visibility = on  &
   size_of_icons = 20.0
!
part create rigid_body mass_properties  &
   part_name = .egpp.PART_11  &
   material_type = .egpp.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .egpp.PART_11.CYLINDER_29  &
   adams_id = 29  &
   center_marker = .egpp.PART_11.MARKER_23  &
   angle_extent = 360.0  &
   length = 500.0  &
   radius = 4.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
part attributes  &
   part_name = .egpp.PART_11  &
   color = CYAN  &
   visibility = on  &
   name_visibility = off  &
   size_of_icons = 20.0
!
!----------------------------------- Joints -----------------------------------!
!
!
constraint create joint cylindrical  &
   joint_name = .egpp.JOINT_16  &
   adams_id = 16  &
   i_marker_name = .egpp.axe3.MARKER_79  &
   j_marker_name = .egpp.ground.MARKER_80
!
constraint attributes  &
   constraint_name = .egpp.JOINT_16  &
   visibility = off  &
   name_visibility = off
!
constraint create joint cylindrical  &
   joint_name = .egpp.pivot2  &
   adams_id = 2  &
   i_marker_name = .egpp.axe4.MARKER_26  &
   j_marker_name = .egpp.ground.MARKER_27
!
constraint attributes  &
   constraint_name = .egpp.pivot2  &
   visibility = off  &
   name_visibility = off  &
   size_of_icons = 20.0
!
constraint create joint cylindrical  &
   joint_name = .egpp.JOINT_17  &
   adams_id = 17  &
   i_marker_name = .egpp.axe4.MARKER_81  &
   j_marker_name = .egpp.ground.MARKER_82
!
constraint attributes  &
   constraint_name = .egpp.JOINT_17  &
   visibility = off  &
   name_visibility = off
!
constraint create joint cylindrical  &
   joint_name = .egpp.pivot4  &
   adams_id = 4  &
   i_marker_name = .egpp.axe6.MARKER_30  &
   j_marker_name = .egpp.ground.MARKER_31
!
constraint attributes  &
   constraint_name = .egpp.pivot4  &
   visibility = off  &
   name_visibility = off  &
   size_of_icons = 20.0
!
constraint create joint cylindrical  &
   joint_name = .egpp.JOINT_20  &
   adams_id = 20  &
   i_marker_name = .egpp.axe6.MARKER_90  &
   j_marker_name = .egpp.axe8.MARKER_91
!
constraint attributes  &
   constraint_name = .egpp.JOINT_20  &
   visibility = off  &
   name_visibility = off
!
constraint create joint cylindrical  &
   joint_name = .egpp.JOINT_19  &
   adams_id = 19  &
   i_marker_name = .egpp.axe5.MARKER_86  &
   j_marker_name = .egpp.ground.MARKER_87
!
constraint attributes  &
   constraint_name = .egpp.JOINT_19  &
   visibility = off  &
   name_visibility = off
!
constraint create joint translational  &
   joint_name = .egpp.JOINT_12  &
   adams_id = 12  &
   i_marker_name = .egpp.egpart1.MARKER_66  &
   j_marker_name = .egpp.axe8.MARKER_67
!
constraint attributes  &
   constraint_name = .egpp.JOINT_12  &
   visibility = off  &
   name_visibility = off
!
constraint create joint spherical  &
   joint_name = .egpp.JOINT_21  &
   adams_id = 21  &
   i_marker_name = .egpp.egpart1.MARKER_115  &
   j_marker_name = .egpp.ground.MARKER_116
!
constraint attributes  &
   constraint_name = .egpp.JOINT_21  &
   visibility = off  &
   name_visibility = off
!
constraint create joint spherical  &
   joint_name = .egpp.JOINT_9  &
   adams_id = 9  &
   i_marker_name = .egpp.PART_11.MARKER_57  &
   j_marker_name = .egpp.egpart1.MARKER_58
!
constraint attributes  &
   constraint_name = .egpp.JOINT_9  &
   visibility = off  &
   name_visibility = off  &
   size_of_icons = 20.0
!
constraint create joint cylindrical  &
   joint_name = .egpp.JOINT_10  &
   adams_id = 10  &
   i_marker_name = .egpp.egpart2.MARKER_59  &
   j_marker_name = .egpp.PART_11.MARKER_60
!
constraint attributes  &
   constraint_name = .egpp.JOINT_10  &
   visibility = off  &
   name_visibility = off  &
   size_of_icons = 20.0
!
constraint create joint cylindrical  &
   joint_name = .egpp.JOINT_11  &
   adams_id = 11  &
   i_marker_name = .egpp.egpart2.MARKER_61  &
   j_marker_name = .egpp.ground.MARKER_62
!
constraint attributes  &
   constraint_name = .egpp.JOINT_11  &
   visibility = off  &
   name_visibility = off  &
   size_of_icons = 20.0
!
constraint create joint cylindrical  &
   joint_name = .egpp.JOINT_18  &
   adams_id = 18  &
   i_marker_name = .egpp.axe5.MARKER_83  &
   j_marker_name = .egpp.ground.MARKER_84
!
constraint attributes  &
   constraint_name = .egpp.JOINT_18  &
   visibility = off  &
   name_visibility = off
!
!----------------------------------- Forces -----------------------------------!
!
!
!----------------------------------- Gears ------------------------------------!
!
!
constraint create complex_joint gear  &
   gear_name = .egpp.GEAR_4  &
   adams_id = 4  &
   joint_name =  &
      .egpp.pivot2,  &
      .egpp.JOINT_16  &
   common_velocity_marker = .egpp.ground.marqeureng1
!
constraint create complex_joint gear  &
   gear_name = .egpp.GEAR_6  &
   adams_id = 6  &
   joint_name =  &
      .egpp.pivot4,  &
      .egpp.JOINT_19  &
   common_velocity_marker = .egpp.ground.repeng3
!
constraint create complex_joint gear  &
   gear_name = .egpp.eng2  &
   adams_id = 5  &
   joint_name =  &
      .egpp.JOINT_18,  &
      .egpp.JOINT_17  &
   common_velocity_marker = .egpp.ground.marqeng2
!
!-------------------------- Adams/View UDE Instances --------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
undo begin_block suppress = yes
!
ude create instance  &
   instance_name = .egpp.general_motion_1  &
   definition_name = .MDI.Constraints.general_motion  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0, 0.0, 0.0
!
!-------------------------- Adams/View UDE Instance ---------------------------!
!
!
variable modify  &
   variable_name = .egpp.general_motion_1.i_marker  &
   object_value = (.egpp.axe3.MARKER_79)
!
variable modify  &
   variable_name = .egpp.general_motion_1.j_marker  &
   object_value = (.egpp.ground.MARKER_80)
!
variable modify  &
   variable_name = .egpp.general_motion_1.constraint  &
   object_value = (.egpp.JOINT_16)
!
variable modify  &
   variable_name = .egpp.general_motion_1.t1_type  &
   integer_value = 0
!
variable modify  &
   variable_name = .egpp.general_motion_1.t2_type  &
   integer_value = 0
!
variable modify  &
   variable_name = .egpp.general_motion_1.t3_type  &
   integer_value = 1
!
variable modify  &
   variable_name = .egpp.general_motion_1.r1_type  &
   integer_value = 0
!
variable modify  &
   variable_name = .egpp.general_motion_1.r2_type  &
   integer_value = 0
!
variable modify  &
   variable_name = .egpp.general_motion_1.r3_type  &
   integer_value = 2
!
variable modify  &
   variable_name = .egpp.general_motion_1.t1_func  &
   string_value = "0 * time"
!
variable modify  &
   variable_name = .egpp.general_motion_1.t2_func  &
   string_value = "0 * time"
!
variable modify  &
   variable_name = .egpp.general_motion_1.t3_func  &
   string_value = "0"
!
variable modify  &
   variable_name = .egpp.general_motion_1.r1_func  &
   string_value = "0 * time"
!
variable modify  &
   variable_name = .egpp.general_motion_1.r2_func  &
   string_value = "0 * time"
!
variable modify  &
   variable_name = .egpp.general_motion_1.r3_func  &
   string_value = "125.6637"
!
variable modify  &
   variable_name = .egpp.general_motion_1.t1_ic_disp  &
   real_value = 0.0
!
variable modify  &
   variable_name = .egpp.general_motion_1.t2_ic_disp  &
   real_value = 0.0
!
variable modify  &
   variable_name = .egpp.general_motion_1.t3_ic_disp  &
   real_value = 0.0
!
variable modify  &
   variable_name = .egpp.general_motion_1.r1_ic_disp  &
   real_value = 0.0
!
variable modify  &
   variable_name = .egpp.general_motion_1.r2_ic_disp  &
   real_value = 0.0
!
variable modify  &
   variable_name = .egpp.general_motion_1.r3_ic_disp  &
   real_value = 0.0
!
variable modify  &
   variable_name = .egpp.general_motion_1.t1_ic_velo  &
   real_value = 0.0
!
variable modify  &
   variable_name = .egpp.general_motion_1.t2_ic_velo  &
   real_value = 0.0
!
variable modify  &
   variable_name = .egpp.general_motion_1.t3_ic_velo  &
   real_value = 0.0
!
variable modify  &
   variable_name = .egpp.general_motion_1.r1_ic_velo  &
   real_value = 0.0
!
variable modify  &
   variable_name = .egpp.general_motion_1.r2_ic_velo  &
   real_value = 0.0
!
variable modify  &
   variable_name = .egpp.general_motion_1.r3_ic_velo  &
   real_value = 0.0
!
ude modify instance  &
   instance_name = .egpp.general_motion_1
!
undo end_block
!
!---------------------------------- Accgrav -----------------------------------!
!
!
force create body gravitational  &
   gravity_field_name = gravity  &
   x_component_gravity = 0.0  &
   y_component_gravity = -9806.65  &
   z_component_gravity = 0.0
!
force attributes  &
   force_name = gravity  &
   size_of_icons = 20.0
!
!----------------------------- Analysis settings ------------------------------!
!
!
!---------------------------------- Measures ----------------------------------!
!
!
measure create angle  &
   measure_name = .egpp.Debattement  &
   first_point = .egpp.ground.MARKER_128  &
   middle_point = .egpp.ground.MARKER_129  &
   last_point = .egpp.egpart2.MARKER_130
!
data_element attributes  &
   data_element_name = .egpp.Debattement  &
   color = WHITE
!
!----------------------------- Simulation Scripts -----------------------------!
!
!
simulation script create  &
   sim_script_name = .egpp.Last_Sim  &
   commands =   &
              "simulation single_run transient type=auto_select duration=0.933 number_of_steps=93 model_name=.egpp initial_static=no"
!
!---------------------------- Function definitions ----------------------------!
!
!
!-------------------------- Adams/View UDE Instance ---------------------------!
!
!
ude modify instance  &
   instance_name = .egpp.general_motion_1
!
!--------------------------- Expression definitions ---------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = ground
!
marker modify  &
   marker_name = .egpp.ground.MARKER_27  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.C1))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_31  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.POINT_1))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_62  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.PD))
!
marker modify  &
   marker_name = .egpp.ground.repeng3  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.pointeng3))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_76  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_80  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.B1))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_82  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.D))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_84  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.F))
!
marker modify  &
   marker_name = .egpp.ground.marqeng2  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.POINT_35))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_87  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.POINT_5))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_93  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P2))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_94  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_97  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_98  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P2))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_100  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_101  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P2))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_103  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_104  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P2))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_106  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_107  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P2))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_109  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_110  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P2))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_112  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_113  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P2))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_116  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.O))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_118  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_119  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P2))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_120  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_121  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P2))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_122  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_123  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P2))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_125  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_126  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P2))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_128  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P))
!
marker modify  &
   marker_name = .egpp.ground.MARKER_129  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P2))
!
marker modify  &
   marker_name = .egpp.axe6.MARKER_1  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.POINT_1))  &
   relative_to = .egpp.axe6
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.axe6.CYLINDER_2  &
   length = (1.5cm)  &
   radius = (2.8cm)
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.axe6.CYLINDER_4  &
   length = (2.75cm)  &
   radius = (0.5cm)
!
marker modify  &
   marker_name = .egpp.axe6.MARKER_30  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.POINT_1))  &
   relative_to = .egpp.axe6
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
marker modify  &
   marker_name = .egpp.axe6.MARKER_88  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.axe6.pointbiellebas))  &
   relative_to = .egpp.axe6
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
marker modify  &
   marker_name = .egpp.axe6.MARKER_89  &
   location =   &
      (LOC_RELATIVE_TO({2.15cm, 0.0, 0.0}, .egpp.axe6.MARKER_88))  &
   relative_to = .egpp.axe6
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape link  &
   link_name = .egpp.axe6.LINK_35  &
   width = (1cm)  &
   depth = (0.5cm)
!
marker modify  &
   marker_name = .egpp.axe5.MARKER_3  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.POINT_5))  &
   orientation =   &
      (ORI_ALONG_AXIS(.egpp.ground.POINT_5, .egpp.ground.POINT_5_2, "Z"))  &
   relative_to = .egpp.axe5
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.axe5.CYLINDER_5  &
   length = (1.5cm)  &
   radius = (1.4cm)
!
marker modify  &
   marker_name = .egpp.axe5.MARKER_4  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.POINT_5))  &
   orientation =   &
      (ORI_ALONG_AXIS(.egpp.ground.POINT_5, .egpp.ground.F, "Z"))  &
   relative_to = .egpp.axe5
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.axe5.CYLINDER_6  &
   length = (3cm)  &
   radius = (1cm)
!
marker modify  &
   marker_name = .egpp.axe5.MARKER_5  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.F))  &
   orientation =   &
      (ORI_ALONG_AXIS(.egpp.ground.F, .egpp.axe5.F1, "Z"))  &
   relative_to = .egpp.axe5
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape frustum  &
   frustum_name = .egpp.axe5.FRUSTUM_8  &
   length = (10.0mm)  &
   top_radius = (1.63cm)  &
   bottom_radius = (3.37cm)
!
marker modify  &
   marker_name = .egpp.axe5.MARKER_83  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.F))  &
   relative_to = .egpp.axe5
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
marker modify  &
   marker_name = .egpp.axe5.MARKER_86  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.POINT_5))  &
   relative_to = .egpp.axe5
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
marker modify  &
   marker_name = .egpp.axe4.marqueureng2  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.D))  &
   orientation =   &
      (ORI_ALONG_AXIS(.egpp.ground.D, .egpp.ground.D1, "Z"))  &
   relative_to = .egpp.axe4
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape frustum  &
   frustum_name = .egpp.axe4.FRUSTUM_9  &
   length = (1cm)  &
   top_radius = (0.21cm)  &
   bottom_radius = (0.79cm)
!
marker modify  &
   marker_name = .egpp.axe4.MARKER_7  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.D))  &
   orientation =   &
      (ORI_ALONG_AXIS(.egpp.ground.D, .egpp.ground.C1, "Z"))  &
   relative_to = .egpp.axe4
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.axe4.CYLINDER_10  &
   length = (6cm)  &
   radius = (0.5cm)
!
marker modify  &
   marker_name = .egpp.axe4.MARKER_8  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.C1))  &
   orientation =   &
      (ORI_ALONG_AXIS(.egpp.ground.C1, .egpp.ground.C, "Z"))  &
   relative_to = .egpp.axe4
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.axe4.CYLINDER_11  &
   length = (1cm)  &
   radius = (2.8cm)
!
marker modify  &
   marker_name = .egpp.axe4.MARKER_26  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.C1))  &
   relative_to = .egpp.axe4
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
marker modify  &
   marker_name = .egpp.axe4.MARKER_81  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.D))  &
   relative_to = .egpp.axe4
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
marker modify  &
   marker_name = .egpp.axe3.MARKER_9  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.B1))  &
   orientation =   &
      (ORI_ALONG_AXIS(.egpp.ground.B1, .egpp.ground.B, "Z"))  &
   relative_to = .egpp.axe3
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.axe3.CYLINDER_13  &
   length = (1cm)  &
   radius = (1.4cm)
!
marker modify  &
   marker_name = .egpp.axe3.MARKER_10  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.B))  &
   orientation =   &
      (ORI_ALONG_AXIS(.egpp.ground.B, .egpp.ground.A, "Z"))  &
   relative_to = .egpp.axe3
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.axe3.CYLINDER_14  &
   length = (20.4cm)  &
   radius = (1cm)
!
marker modify  &
   marker_name = .egpp.axe3.MARKER_79  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.B1))  &
   relative_to = .egpp.axe3
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.axe8.CYLINDER_19  &
   length = (0.75cm)  &
   radius = (0.5cm)
!
geometry modify shape block  &
   block_name = .egpp.axe8.BOX_21  &
   diag_corner_coords =   &
      (1cm),  &
      (1.5cm),  &
      (1.0cm)
!
marker modify  &
   marker_name = .egpp.axe8.MARKER_67  &
   location =   &
      (LOC_RELATIVE_TO({0, -1, 0}, .egpp.axe8.pointglissiere))  &
   relative_to = .egpp.axe8
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
marker modify  &
   marker_name = .egpp.egpart1.MARKER_16  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.N))  &
   orientation =   &
      (ORI_ALONG_AXIS(.egpp.ground.N, .egpp.ground.O, "Z"))  &
   relative_to = .egpp.egpart1
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.egpart1.CYLINDER_23  &
   length = (6.5cm)  &
   radius = (0.4cm)
!
marker modify  &
   marker_name = .egpp.egpart1.MARKER_17  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.O))  &
   orientation =   &
      (ORI_ALONG_AXIS(.egpp.ground.O, .egpp.ground.P, "Z"))  &
   relative_to = .egpp.egpart1
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.egpart1.CYLINDER_24  &
   radius = (0.4cm)
!
marker modify  &
   marker_name = .egpp.egpart1.MARKER_58  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.N))  &
   relative_to = .egpp.egpart1
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
marker modify  &
   marker_name = .egpp.egpart1.MARKER_66  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.axe8.pointglissiere))  &
   relative_to = .egpp.egpart1
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
marker modify  &
   marker_name = .egpp.egpart1.MARKER_92  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P))  &
   orientation =   &
      (ORI_ALONG_AXIS(.egpp.ground.P, .egpp.egpart1.Q, "Z"))  &
   relative_to = .egpp.egpart1
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.egpart1.CYLINDER_35  &
   length = (50cm)  &
   radius = (0.4cm)
!
marker modify  &
   marker_name = .egpp.egpart1.MARKER_95  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.egpart1.Q))  &
   relative_to = .egpp.egpart1
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
marker modify  &
   marker_name = .egpp.egpart1.MARKER_115  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.O))  &
   relative_to = .egpp.egpart1
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
marker modify  &
   marker_name = .egpp.egpart2.MARKER_16  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.PD2))  &
   orientation =   &
      (ORI_ALONG_AXIS(.egpp.ground.N, .egpp.ground.O, "Z"))  &
   relative_to = .egpp.egpart2
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.egpart2.CYLINDER_23  &
   length = (6.5cm)  &
   radius = (0.4cm)
!
marker modify  &
   marker_name = .egpp.egpart2.MARKER_17  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.PD))  &
   orientation =   &
      (ORI_ALONG_AXIS(.egpp.ground.O, .egpp.ground.P, "Z"))  &
   relative_to = .egpp.egpart2
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.egpart2.CYLINDER_24  &
   length = (1.91cm)  &
   radius = (0.4cm)
!
marker modify  &
   marker_name = .egpp.egpart2.MARKER_59  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.PD2))  &
   relative_to = .egpp.egpart2
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
marker modify  &
   marker_name = .egpp.egpart2.MARKER_61  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.PD))  &
   relative_to = .egpp.egpart2
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
marker modify  &
   marker_name = .egpp.egpart2.MARKER_131  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.P2))  &
   relative_to = .egpp.egpart2
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.egpart2.CYLINDER_40  &
   length = (50cm)  &
   radius = (0.4cm)
!
marker modify  &
   marker_name = .egpp.PART_11.MARKER_23  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.N))  &
   orientation =   &
      (ORI_ALONG_AXIS(.egpp.ground.N, .egpp.ground.PD2, "Z"))  &
   relative_to = .egpp.PART_11
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
geometry modify shape cylinder  &
   cylinder_name = .egpp.PART_11.CYLINDER_29  &
   length = (50cm)  &
   radius = (0.4cm)
!
marker modify  &
   marker_name = .egpp.PART_11.MARKER_57  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.N))  &
   relative_to = .egpp.PART_11
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
marker modify  &
   marker_name = .egpp.PART_11.MARKER_60  &
   location =   &
      (LOC_RELATIVE_TO({0, 0, 0}, .egpp.ground.PD2))  &
   relative_to = .egpp.PART_11
!
defaults coordinate_system  &
   default_coordinate_system = .egpp.ground
!
material modify  &
   material_name = .egpp.steel  &
   youngs_modulus = (2.07E+011(Newton/meter**2))  &
   density = (7801.0(kg/meter**3))
!
model display  &
   model_name = egpp