! !-------------------------- Default Units for Model ---------------------------! ! ! defaults units & length = mm & angle = deg & force = newton & mass = kg & time = sec ! defaults units & coordinate_system_type = cartesian & orientation_type = body313 ! !--------------------------- Model Specific Colors ----------------------------! ! ! if condition = (! db_exists(".colors.MIDNIGHT_BLUE")) ! color create & color_name = .colors.MIDNIGHT_BLUE & red_component = 0.0 & blue_component = 0.3568627451 & green_component = 0.0 ! else ! color modify & color_name = .colors.MIDNIGHT_BLUE & red_component = 0.0 & blue_component = 0.3568627451 & green_component = 0.0 ! end ! !------------------------ Default Attributes for Model ------------------------! ! ! defaults attributes & inheritance = bottom_up & icon_visibility = on & grid_visibility = off & size_of_icons = 5.0 & spacing_for_grid = 1000.0 ! !------------------------------ Adams/View Model ------------------------------! ! ! model create & model_name = meca4bar ! model attributes & model_name = meca4bar & size_of_icons = 5.0 ! view erase ! !--------------------------------- Materials ----------------------------------! ! ! material create & material_name = .meca4bar.steel & adams_id = 4 & youngs_modulus = 2.07E+005 & poissons_ratio = 0.29 & density = 7.801E-006 ! material create & material_name = .meca4bar.aluminum & adams_id = 3 & youngs_modulus = 7.1705E+004 & poissons_ratio = 0.33 & density = 2.74E-006 ! material create & material_name = .meca4bar.glass & adams_id = 2 & youngs_modulus = 4.62E+004 & poissons_ratio = 0.245 & density = 2.595E-006 ! !-------------------------------- Rigid Parts ---------------------------------! ! ! Create parts and their dependent markers and graphics ! !----------------------------------- ground -----------------------------------! ! ! ! ****** Ground Part ****** ! defaults model & part_name = ground ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.ground.MARKER_20 & adams_id = 20 & location = 1070.1155680649, -77.6309505207, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.ground.MARKER_20 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.ground.MARKER_66 & adams_id = 66 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.ground.MARKER_66 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.ground.MARKER_118 & adams_id = 118 & location = 1100.0, -75.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.ground.MARKER_118 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.ground.MARKER_166 & adams_id = 166 & location = 532.5, -75.0, -75.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.ground.MARKER_166 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.ground.MARKER_174 & adams_id = 174 & location = 532.5, -75.0, -75.0 & orientation = 90.0d, 90.0d, 0.0d ! marker attributes & marker_name = .meca4bar.ground.MARKER_174 & visibility = on ! marker create & marker_name = .meca4bar.ground.MARKER_176 & adams_id = 176 & location = 572.5, -75.0, -75.0 & orientation = 90.0d, 90.0d, 0.0d ! marker attributes & marker_name = .meca4bar.ground.MARKER_176 & visibility = on ! marker create & marker_name = .meca4bar.ground.MARKER_212 & adams_id = 212 & location = 500.0, -150.0, -150.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.ground.MARKER_212 & visibility = on ! marker create & marker_name = .meca4bar.ground.MARKER_196 & adams_id = 196 & location = 510.0, -75.0, -75.0 & orientation = 90.0d, 90.0d, 0.0d ! marker attributes & marker_name = .meca4bar.ground.MARKER_196 & visibility = on ! marker create & marker_name = .meca4bar.ground.MARKER_202 & adams_id = 202 & location = 1075.0, -75.0, -95.0 & orientation = 180.0d, 90.0d, 180.0d ! marker attributes & marker_name = .meca4bar.ground.MARKER_202 & visibility = on ! marker create & marker_name = .meca4bar.ground.MARKER_208 & adams_id = 208 & location = 500.0, -145.6187820219, -75.0 & orientation = 180.0d, 90.0d, 180.0d ! marker attributes & marker_name = .meca4bar.ground.MARKER_208 & visibility = on ! part create rigid_body mass_properties & part_name = .meca4bar.ground & material_type = .meca4bar.steel ! ! ****** Points for current part ****** ! point create & point_name = .meca4bar.ground.POINT_1 & location = 0.0, 0.0, 0.0 ! point attributes & point_name = .meca4bar.ground.POINT_1 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PS1 & location = 850.0, -75.0, 0.0 ! point attributes & point_name = .meca4bar.ground.PS1 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PS2 & location = 1350.0, -75.0, 0.0 ! point attributes & point_name = .meca4bar.ground.PS2 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.Pt_A & location = 1100.0, -75.0, 0.0 ! point attributes & point_name = .meca4bar.ground.Pt_A & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.Pt_Cp & location = 896.68638, -92.8992, 0.0 ! point attributes & point_name = .meca4bar.ground.Pt_Cp & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.Pt_Bp & location = 1129.8844141155, -72.3690542467, 0.0 ! point attributes & point_name = .meca4bar.ground.Pt_Bp & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.Pt_C & location = 1303.3136, -57.10078, 0.0 ! point attributes & point_name = .meca4bar.ground.Pt_C & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.Pt_B & location = 1070.1155680649, -77.6309505207, 0.0 ! point attributes & point_name = .meca4bar.ground.Pt_B & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.Ptextrem1 & location = 512.9134, 72.6009, 0.0 ! point attributes & point_name = .meca4bar.ground.Ptextrem1 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.Ptextrem2 & location = 12.9134, 72.6009, 0.0 ! point attributes & point_name = .meca4bar.ground.Ptextrem2 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PtCmoin5 & location = 1303.3136, -57.10078, -5.0 ! point attributes & point_name = .meca4bar.ground.PtCmoin5 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PtBmoin15 & location = 1070.1155680649, -77.6309505207, -15.0 ! point attributes & point_name = .meca4bar.ground.PtBmoin15 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PtBmoin10 & location = 1070.1155680649, -77.6309505207, -10.0 ! point attributes & point_name = .meca4bar.ground.PtBmoin10 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PtAmoin10 & location = 1100.0, -75.0, -10.0 ! point attributes & point_name = .meca4bar.ground.PtAmoin10 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.Pt_D & location = 1350.0, -75.0, -5.0 ! point attributes & point_name = .meca4bar.ground.Pt_D & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PtCmoin10 & location = 1303.3136, -57.10078, -10.0 ! point attributes & point_name = .meca4bar.ground.PtCmoin10 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PtAmoin5 & location = 1100.0, -75.0, -5.0 ! point attributes & point_name = .meca4bar.ground.PtAmoin5 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PtAmoin15 & location = 1100.0, -75.0, -15.0 ! point attributes & point_name = .meca4bar.ground.PtAmoin15 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PtBpmoin15 & location = 1129.8844141155, -72.3690542467, -15.0 ! point attributes & point_name = .meca4bar.ground.PtBpmoin15 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PtBpmoin10 & location = 1129.8844141155, -72.3690542467, -10.0 ! point attributes & point_name = .meca4bar.ground.PtBpmoin10 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PtCpmoin10 & location = 896.68638, -92.8992, -10.0 ! point attributes & point_name = .meca4bar.ground.PtCpmoin10 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PtCpmoin15 & location = 896.68638, -92.8992, -15.0 ! point attributes & point_name = .meca4bar.ground.PtCpmoin15 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.Pt_test & location = 1070.0, -75.0, -100.0 ! point attributes & point_name = .meca4bar.ground.Pt_test & visibility = on ! point create & point_name = .meca4bar.ground.PtBmoin5 & location = 1070.1155680649, -77.6309505207, -5.0 ! point attributes & point_name = .meca4bar.ground.PtBmoin5 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PtDpmoins15 & location = 850.0, -75.0, -15.0 ! point attributes & point_name = .meca4bar.ground.PtDpmoins15 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PtBpmoin20 & location = 1129.8844141155, -72.3690542467, -20.0 ! point attributes & point_name = .meca4bar.ground.PtBpmoin20 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PtBmoin20 & location = 1070.1155680649, -77.6309505207, -20.0 ! point attributes & point_name = .meca4bar.ground.PtBmoin20 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.P11 & location = 510.0, -75.0, -75.0 ! point attributes & point_name = .meca4bar.ground.P11 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.P12 & location = 520.0, -75.0, -75.0 ! point attributes & point_name = .meca4bar.ground.P12 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.S11 & location = 510.0, -58.0, -75.0 ! point attributes & point_name = .meca4bar.ground.S11 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.S12 & location = 520.0, -58.0, -75.0 ! point attributes & point_name = .meca4bar.ground.S12 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PS11 & location = 532.5, -58.0, -75.0 ! point attributes & point_name = .meca4bar.ground.PS11 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PS12 & location = 532.5, -75.0, -75.0 ! point attributes & point_name = .meca4bar.ground.PS12 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.S21 & location = 550.0, -58.0, -75.0 ! point attributes & point_name = .meca4bar.ground.S21 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.S22 & location = 560.0, -58.0, -75.0 ! point attributes & point_name = .meca4bar.ground.S22 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.P21 & location = 550.0, -75.0, -75.0 ! point attributes & point_name = .meca4bar.ground.P21 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.P22 & location = 560.0, -75.0, -75.0 ! point attributes & point_name = .meca4bar.ground.P22 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PS21 & location = 572.5, -58.0, -75.0 ! point attributes & point_name = .meca4bar.ground.PS21 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.PS22 & location = 572.5, -75.0, -75.0 ! point attributes & point_name = .meca4bar.ground.PS22 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.Pt_E & location = 500.0, -75.0, -75.0 ! point attributes & point_name = .meca4bar.ground.Pt_E & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.c11 & location = 515.0, -66.5, -75.0 ! point attributes & point_name = .meca4bar.ground.c11 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.c12 & location = 515.0, -49.5, -75.0 ! point attributes & point_name = .meca4bar.ground.c12 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.c21 & location = 555.0, -66.5, -75.0 ! point attributes & point_name = .meca4bar.ground.c21 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.c22 & location = 555.0, -49.5, -75.0 ! point attributes & point_name = .meca4bar.ground.c22 & visibility = on & size_of_icons = 5.0 ! point create & point_name = .meca4bar.ground.Pt_Ec1 & location = 1080.0, -75.0, -75.0 ! point attributes & point_name = .meca4bar.ground.Pt_Ec1 & visibility = on ! point create & point_name = .meca4bar.ground.Pt_Ec12 & location = 1075.0, -75.0, -95.0 ! point attributes & point_name = .meca4bar.ground.Pt_Ec12 & visibility = on ! point create & point_name = .meca4bar.ground.Pt_Ec2 & location = 1100.0, -75.0, -90.0 ! point attributes & point_name = .meca4bar.ground.Pt_Ec2 & visibility = on ! point create & point_name = .meca4bar.ground.Pt_Ec2p & location = 1100.0, -75.0, -100.0 ! point attributes & point_name = .meca4bar.ground.Pt_Ec2p & visibility = on ! point create & point_name = .meca4bar.ground.Pt_Ec1p & location = 1070.0, -75.0, -75.0 ! point attributes & point_name = .meca4bar.ground.Pt_Ec1p & visibility = on ! point create & point_name = .meca4bar.ground.Pt_Amoins20 & location = 1100.0, -75.0, -20.0 ! point attributes & point_name = .meca4bar.ground.Pt_Amoins20 & visibility = on ! point create & point_name = .meca4bar.ground.Pt_min & location = 500.0, -150.0, -150.0 ! point attributes & point_name = .meca4bar.ground.Pt_min & visibility = on ! point create & point_name = .meca4bar.ground.Pt_max & location = 1400.0, 0.0, 0.0 ! point attributes & point_name = .meca4bar.ground.Pt_max & visibility = on ! point create & point_name = .meca4bar.ground.Pt_moteur & location = 100.0, -75.0, -75.0 ! point attributes & point_name = .meca4bar.ground.Pt_moteur & visibility = on ! ! ****** Graphics for current part ****** ! part attributes & part_name = .meca4bar.ground & visibility = on & name_visibility = on & size_of_icons = 5.0 ! !------------------------------------ bati ------------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.bati & adams_id = 2 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.bati ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.bati.MARKER_1 & adams_id = 1 & location = 850.0, -75.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bati.MARKER_1 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.bati.MARKER_2 & adams_id = 2 & location = 1350.0, -75.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bati.MARKER_2 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.bati.cm & adams_id = 21 & location = 1100.0, -75.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bati.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.bati.MARKER_74 & adams_id = 74 & location = 1350.0, -75.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bati.MARKER_74 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.bati.MARKER_19 & adams_id = 19 & location = 1070.1155680649, -77.6309505207, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bati.MARKER_19 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.bati.MARKER_99 & adams_id = 99 & location = 850.0, -75.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bati.MARKER_99 & visibility = on & size_of_icons = 5.0 ! part create rigid_body mass_properties & part_name = .meca4bar.bati & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape link & link_name = .meca4bar.bati.LINK_5 & i_marker = .meca4bar.bati.MARKER_1 & j_marker = .meca4bar.bati.MARKER_2 & width = 10.0 & depth = 5.0 ! geometry attributes & geometry_name = .meca4bar.bati.LINK_5 & visibility = off & render = wireframe ! part attributes & part_name = .meca4bar.bati & color = BLUE & visibility = on & name_visibility = on & size_of_icons = 5.0 ! !---------------------------------- bielle1 -----------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.bielle1 & adams_id = 16 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.bielle1 ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.bielle1.MARKER_88 & adams_id = 88 & location = 1303.3136, -57.10078, -5.0 & orientation = 185.0312053593d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bielle1.MARKER_88 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.bielle1.MARKER_89 & adams_id = 89 & location = 1070.1155680649, -77.6309505207, -5.0 & orientation = 185.0312053593d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bielle1.MARKER_89 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.bielle1.cm & adams_id = 111 & location = 1186.7145840324, -67.3658652604, -5.0 & orientation = 5.0312053593d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bielle1.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.bielle1.MARKER_110 & adams_id = 110 & location = 1070.1155680649, -77.6309505207, -5.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bielle1.MARKER_110 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.bielle1.MARKER_119 & adams_id = 119 & location = 1303.3136, -57.10078, -5.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bielle1.MARKER_119 & visibility = on & size_of_icons = 5.0 ! part create rigid_body mass_properties & part_name = .meca4bar.bielle1 & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape link & link_name = .meca4bar.bielle1.LINK_31 & i_marker = .meca4bar.bielle1.MARKER_88 & j_marker = .meca4bar.bielle1.MARKER_89 & width = 10.0 & depth = 5.0 ! part attributes & part_name = .meca4bar.bielle1 & color = CYAN & visibility = on & name_visibility = off & size_of_icons = 5.0 ! !--------------------------------- balancier1 ---------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.balancier1 & adams_id = 13 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.balancier1 ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.balancier1.MARKER_67 & adams_id = 67 & location = 1350.0, -75.0, -5.0 & orientation = 159.0235462625d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.balancier1.MARKER_67 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.balancier1.MARKER_68 & adams_id = 68 & location = 1303.3136, -57.10078, -5.0 & orientation = 159.0235462625d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.balancier1.MARKER_68 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.balancier1.cm & adams_id = 83 & location = 1326.6568, -66.05039, -5.0 & orientation = 339.0235462625d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.balancier1.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.balancier1.MARKER_73 & adams_id = 73 & location = 1350.0, -75.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.balancier1.MARKER_73 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.balancier1.MARKER_82 & adams_id = 82 & location = 1350.0, -75.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.balancier1.MARKER_82 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.balancier1.MARKER_120 & adams_id = 120 & location = 1303.3136, -57.10078, -5.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.balancier1.MARKER_120 & visibility = on & size_of_icons = 5.0 ! part create rigid_body mass_properties & part_name = .meca4bar.balancier1 & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape link & link_name = .meca4bar.balancier1.LINK_26 & i_marker = .meca4bar.balancier1.MARKER_67 & j_marker = .meca4bar.balancier1.MARKER_68 & width = 10.0 & depth = 5.0 ! part attributes & part_name = .meca4bar.balancier1 & color = MAGENTA & visibility = on & name_visibility = off & size_of_icons = 5.0 ! !--------------------------------- manivelle1 ---------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.manivelle1 & adams_id = 17 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.manivelle1 ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.manivelle1.MARKER_90 & adams_id = 90 & location = 1129.8844141155, -72.3690542467, -10.0 & orientation = 185.0312023166d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.manivelle1.MARKER_90 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.manivelle1.MARKER_91 & adams_id = 91 & location = 1070.1155680649, -77.6309505207, -10.0 & orientation = 185.0312023166d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.manivelle1.MARKER_91 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.manivelle1.cm & adams_id = 112 & location = 1099.9999910902, -75.0000023837, -10.0 & orientation = 5.0312023166d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.manivelle1.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.manivelle1.MARKER_105 & adams_id = 105 & location = 1100.0, -75.0, -15.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.manivelle1.MARKER_105 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.manivelle1.MARKER_109 & adams_id = 109 & location = 1070.1155680649, -77.6309505207, -5.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.manivelle1.MARKER_109 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.manivelle1.MARKER_117 & adams_id = 117 & location = 1100.0, -75.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.manivelle1.MARKER_117 & visibility = on & size_of_icons = 5.0 ! part create rigid_body mass_properties & part_name = .meca4bar.manivelle1 & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape link & link_name = .meca4bar.manivelle1.LINK_31 & i_marker = .meca4bar.manivelle1.MARKER_90 & j_marker = .meca4bar.manivelle1.MARKER_91 & width = 10.0 & depth = 5.0 ! part attributes & part_name = .meca4bar.manivelle1 & color = MAIZE & visibility = on & name_visibility = off & size_of_icons = 5.0 ! !--------------------------------- Balancier2 ---------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.Balancier2 & adams_id = 19 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.Balancier2 ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.Balancier2.MARKER_94 & adams_id = 94 & location = 896.68638, -92.8992, -15.0 & orientation = 159.0235594576d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.Balancier2.MARKER_94 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Balancier2.MARKER_95 & adams_id = 95 & location = 850.0, -75.0, -15.0 & orientation = 159.0235594576d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.Balancier2.MARKER_95 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Balancier2.cm & adams_id = 114 & location = 873.34319, -83.9496, -15.0 & orientation = 339.0235594576d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.Balancier2.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Balancier2.MARKER_97 & adams_id = 97 & location = 850.0, -75.0, -15.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.Balancier2.MARKER_97 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Balancier2.MARKER_102 & adams_id = 102 & location = 896.68638, -92.8992, -10.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.Balancier2.MARKER_102 & visibility = on & size_of_icons = 5.0 ! part create rigid_body mass_properties & part_name = .meca4bar.Balancier2 & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape link & link_name = .meca4bar.Balancier2.LINK_33 & i_marker = .meca4bar.Balancier2.MARKER_94 & j_marker = .meca4bar.Balancier2.MARKER_95 & width = 10.0 & depth = 5.0 ! part attributes & part_name = .meca4bar.Balancier2 & color = MAGENTA & visibility = on & name_visibility = off & size_of_icons = 5.0 ! !---------------------------------- bielle2 -----------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.bielle2 & adams_id = 18 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.bielle2 ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.bielle2.MARKER_92 & adams_id = 92 & location = 1129.8844141155, -72.3690542467, -15.0 & orientation = 185.031199274d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bielle2.MARKER_92 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.bielle2.MARKER_93 & adams_id = 93 & location = 896.68638, -92.8992, -15.0 & orientation = 185.031199274d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bielle2.MARKER_93 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.bielle2.cm & adams_id = 113 & location = 1013.2853970577, -82.6341271233, -15.0 & orientation = 5.031199274d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bielle2.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.bielle2.MARKER_101 & adams_id = 101 & location = 896.68638, -92.8992, -10.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bielle2.MARKER_101 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.bielle2.MARKER_107 & adams_id = 107 & location = 1129.8844141155, -72.3690542467, -15.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.bielle2.MARKER_107 & visibility = on & size_of_icons = 5.0 ! part create rigid_body mass_properties & part_name = .meca4bar.bielle2 & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape link & link_name = .meca4bar.bielle2.LINK_32 & i_marker = .meca4bar.bielle2.MARKER_92 & j_marker = .meca4bar.bielle2.MARKER_93 & width = 10.0 & depth = 5.0 ! part attributes & part_name = .meca4bar.bielle2 & color = CYAN & visibility = on & name_visibility = off & size_of_icons = 5.0 ! !---------------------------------- essuied -----------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.essuied & adams_id = 10 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.essuied ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.essuied.MARKER_81 & adams_id = 81 & location = 1350.0, -75.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.essuied.MARKER_81 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.essuied.MARKER_54 & adams_id = 54 & location = 1350.0, -75.0, 0.0 & orientation = 170.000003503d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.essuied.MARKER_54 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.essuied.MARKER_55 & adams_id = 55 & location = 512.9134, 72.6009, 0.0 & orientation = 170.000003503d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.essuied.MARKER_55 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.essuied.cm & adams_id = 58 & location = 931.4567, -1.19955, 0.0 & orientation = 350.000003503d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.essuied.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.essuied.MARKER_125 & adams_id = 125 & location = 512.9134, 72.6009, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.essuied.MARKER_125 & visibility = on & size_of_icons = 5.0 ! part create rigid_body mass_properties & part_name = .meca4bar.essuied & material_type = .meca4bar.aluminum ! ! ****** Graphics for current part ****** ! geometry create shape link & link_name = .meca4bar.essuied.LINK_16 & i_marker = .meca4bar.essuied.MARKER_54 & j_marker = .meca4bar.essuied.MARKER_55 & width = 10.0 & depth = 5.0 ! part attributes & part_name = .meca4bar.essuied & color = RED & visibility = on & name_visibility = on & size_of_icons = 5.0 ! !---------------------------------- essuieg -----------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.essuieg & adams_id = 11 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.essuieg ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.essuieg.MARKER_59 & adams_id = 59 & location = 850.0, -75.0, 0.0 & orientation = 170.000003503d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.essuieg.MARKER_59 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.essuieg.MARKER_60 & adams_id = 60 & location = 12.9134, 72.6009, 0.0 & orientation = 170.000003503d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.essuieg.MARKER_60 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.essuieg.cm & adams_id = 63 & location = 431.4567, -1.19955, 0.0 & orientation = 350.000003503d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.essuieg.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.essuieg.MARKER_121 & adams_id = 121 & location = 850.0, -75.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.essuieg.MARKER_121 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.essuieg.MARKER_127 & adams_id = 127 & location = 12.9134, 72.6009, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.essuieg.MARKER_127 & visibility = on & size_of_icons = 5.0 ! part create rigid_body mass_properties & part_name = .meca4bar.essuieg & material_type = .meca4bar.aluminum ! ! ****** Graphics for current part ****** ! geometry create shape link & link_name = .meca4bar.essuieg.LINK_18 & i_marker = .meca4bar.essuieg.MARKER_59 & j_marker = .meca4bar.essuieg.MARKER_60 & width = 10.0 & depth = 5.0 ! part attributes & part_name = .meca4bar.essuieg & color = RED & visibility = on & name_visibility = on & size_of_icons = 5.0 ! !--------------------------------- Pare_brise ---------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.Pare_brise & adams_id = 12 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.Pare_brise ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.Pare_brise.MARKER_64 & adams_id = 64 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.Pare_brise.MARKER_64 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Pare_brise.MARKER_65 & adams_id = 65 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.Pare_brise.MARKER_65 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Pare_brise.MARKER_126 & adams_id = 126 & location = 512.9134, 72.6009, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.Pare_brise.MARKER_126 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Pare_brise.MARKER_128 & adams_id = 128 & location = 12.9134, 72.6009, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.Pare_brise.MARKER_128 & visibility = on & size_of_icons = 5.0 ! part create rigid_body mass_properties & part_name = .meca4bar.Pare_brise & material_type = .meca4bar.glass ! ! ****** Graphics for current part ****** ! geometry create shape plane & plane_name = .meca4bar.Pare_brise.PLANE_19 & adams_id = 19 & ref_marker_name = .meca4bar.Pare_brise.MARKER_64 & x_minimum = 0.0 & x_maximum = 1400.0 & y_minimum = 0.0 & y_maximum = 800.0 ! part attributes & part_name = .meca4bar.Pare_brise & color = SKYBLUE & visibility = on & name_visibility = on & size_of_icons = 5.0 ! !---------------------------- axepivotbalancierps1 ----------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.axepivotbalancierps1 & adams_id = 20 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.axepivotbalancierps1 ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.axepivotbalancierps1.MARKER_96 & adams_id = 96 & location = 850.0, -75.0, -15.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.axepivotbalancierps1.MARKER_96 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.axepivotbalancierps1.cm & adams_id = 115 & location = 850.0, -75.0, -7.5 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.axepivotbalancierps1.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.axepivotbalancierps1.MARKER_98 & adams_id = 98 & location = 850.0, -75.0, -15.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.axepivotbalancierps1.MARKER_98 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.axepivotbalancierps1.MARKER_100 & adams_id = 100 & location = 850.0, -75.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.axepivotbalancierps1.MARKER_100 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.axepivotbalancierps1.MARKER_122 & adams_id = 122 & location = 850.0, -75.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.axepivotbalancierps1.MARKER_122 & visibility = on & size_of_icons = 5.0 ! part create rigid_body mass_properties & part_name = .meca4bar.axepivotbalancierps1 & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape cylinder & cylinder_name = .meca4bar.axepivotbalancierps1.CYLINDER_34 & adams_id = 34 & center_marker = .meca4bar.axepivotbalancierps1.MARKER_96 & angle_extent = 360.0 & length = 15.0 & radius = 5.0 & side_count_for_body = 20 & segment_count_for_ends = 20 ! geometry attributes & geometry_name = .meca4bar.axepivotbalancierps1.CYLINDER_34 & color = MAGENTA ! part attributes & part_name = .meca4bar.axepivotbalancierps1 & color = GREEN & visibility = on & name_visibility = off & size_of_icons = 5.0 ! !--------------------------------- manivelle2 ---------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.manivelle2 & adams_id = 21 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.manivelle2 ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.manivelle2.MARKER_103 & adams_id = 103 & location = 1129.8844141155, -72.3690542467, -20.0 & orientation = 185.0312023166d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.manivelle2.MARKER_103 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.manivelle2.MARKER_104 & adams_id = 104 & location = 1070.1155680649, -77.6309505207, -20.0 & orientation = 185.0312023166d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.manivelle2.MARKER_104 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.manivelle2.cm & adams_id = 116 & location = 1099.9999989517, -75.0000002805, -78.9896135126 & orientation = 5.0312023166d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.manivelle2.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.manivelle2.MARKER_106 & adams_id = 106 & location = 1100.0, -75.0, -15.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.manivelle2.MARKER_106 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.manivelle2.MARKER_108 & adams_id = 108 & location = 1129.8844141155, -72.3690542467, -15.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.manivelle2.MARKER_108 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.manivelle2.MARKER_198 & adams_id = 198 & location = 1100.0, -75.0, -90.0 & orientation = 180.0d, 180.0d, 0.0d ! marker attributes & marker_name = .meca4bar.manivelle2.MARKER_198 & visibility = on ! marker create & marker_name = .meca4bar.manivelle2.MARKER_199 & adams_id = 199 & location = 1100.0, -75.0, -90.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.manivelle2.MARKER_199 & visibility = on ! part create rigid_body mass_properties & part_name = .meca4bar.manivelle2 & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape link & link_name = .meca4bar.manivelle2.LINK_36 & i_marker = .meca4bar.manivelle2.MARKER_103 & j_marker = .meca4bar.manivelle2.MARKER_104 & width = 10.0 & depth = 5.0 ! geometry create shape frustum & frustum_name = .meca4bar.manivelle2.FRUSTUM_74 & adams_id = 74 & center_marker = .meca4bar.manivelle2.MARKER_198 & angle_extent = 360.0 & length = 10.0 & top_radius = 30.0 & bottom_radius = 20.0 & side_count_for_body = 20 & segment_count_for_ends = 20 ! geometry create shape cylinder & cylinder_name = .meca4bar.manivelle2.CYLINDER_77 & adams_id = 77 & center_marker = .meca4bar.manivelle2.MARKER_199 & angle_extent = 360.0 & length = 70.0 & radius = 5.0 & side_count_for_body = 20 & segment_count_for_ends = 20 ! part attributes & part_name = .meca4bar.manivelle2 & color = MAIZE & visibility = on & name_visibility = off & size_of_icons = 5.0 ! !-------------------------------- Planetaire1 ---------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.Planetaire1 & adams_id = 28 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.Planetaire1 ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.Planetaire1.MARKER_133 & adams_id = 133 & location = 520.0, -75.0, -75.0 & orientation = 270.0d, 90.0d, 90.0d ! marker attributes & marker_name = .meca4bar.Planetaire1.MARKER_133 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Planetaire1.cm & adams_id = 191 & location = 514.2038216561, -75.0, -75.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.Planetaire1.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Planetaire1.MARKER_150 & adams_id = 150 & location = 510.0, -75.0, -75.0 & orientation = 270.0d, 90.0d, 90.0d ! marker attributes & marker_name = .meca4bar.Planetaire1.MARKER_150 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Planetaire1.MARKER_179 & adams_id = 179 & location = 510.0, -75.0, -75.0 & orientation = 90.0d, 90.0d, 0.0d ! marker attributes & marker_name = .meca4bar.Planetaire1.MARKER_179 & visibility = on ! marker create & marker_name = .meca4bar.Planetaire1.MARKER_195 & adams_id = 195 & location = 510.0, -75.0, -75.0 & orientation = 90.0d, 90.0d, 0.0d ! marker attributes & marker_name = .meca4bar.Planetaire1.MARKER_195 & visibility = on ! part create rigid_body mass_properties & part_name = .meca4bar.Planetaire1 & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape cylinder & cylinder_name = .meca4bar.Planetaire1.CYLINDER_53 & adams_id = 53 & center_marker = .meca4bar.Planetaire1.MARKER_133 & angle_extent = 360.0 & length = 10.0 & radius = 8.5 & side_count_for_body = 20 & segment_count_for_ends = 20 ! geometry create shape cylinder & cylinder_name = .meca4bar.Planetaire1.CYLINDER_67 & adams_id = 67 & center_marker = .meca4bar.Planetaire1.MARKER_150 & angle_extent = 360.0 & length = 10.0 & radius = 2.5 & side_count_for_body = 20 & segment_count_for_ends = 20 ! part attributes & part_name = .meca4bar.Planetaire1 & color = MAIZE & visibility = on & name_visibility = off & size_of_icons = 5.0 ! !----------------------------------- boite ------------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.boite & adams_id = 36 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.boite ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.boite.MARKER_209 & adams_id = 209 & location = 500.0, -150.0, -150.0 & orientation = 180.0d, 90.0d, 180.0d ! marker attributes & marker_name = .meca4bar.boite.MARKER_209 & visibility = on ! marker create & marker_name = .meca4bar.boite.cm & adams_id = 210 & location = 950.0, -75.0, -75.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.boite.cm & visibility = on ! marker create & marker_name = .meca4bar.boite.MARKER_211 & adams_id = 211 & location = 500.0, -150.0, -150.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.boite.MARKER_211 & visibility = on ! part create rigid_body mass_properties & part_name = .meca4bar.boite & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape block & block_name = .meca4bar.boite.BOX_86 & adams_id = 86 & corner_marker = .meca4bar.boite.MARKER_209 & diag_corner_coords = 900.0, -150.0, 150.0 ! geometry attributes & geometry_name = .meca4bar.boite.BOX_86 & render = wireframe ! part attributes & part_name = .meca4bar.boite & color = Gray & visibility = on & name_visibility = off ! !--------------------------------- satellite1 ---------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.satellite1 & adams_id = 26 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.satellite1 ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.satellite1.MARKER_131 & adams_id = 131 & location = 520.0, -58.0, -75.0 & orientation = 270.0d, 90.0d, 90.0d ! marker attributes & marker_name = .meca4bar.satellite1.MARKER_131 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.satellite1.cm & adams_id = 189 & location = 515.0, -58.0, -75.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.satellite1.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.satellite1.MARKER_171 & adams_id = 171 & location = 532.5, -58.0, -75.0 & orientation = 90.0d, 90.0d, 0.0d ! marker attributes & marker_name = .meca4bar.satellite1.MARKER_171 & visibility = on ! part create rigid_body mass_properties & part_name = .meca4bar.satellite1 & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape cylinder & cylinder_name = .meca4bar.satellite1.CYLINDER_51 & adams_id = 51 & center_marker = .meca4bar.satellite1.MARKER_131 & angle_extent = 360.0 & length = 10.0 & radius = 8.5 & side_count_for_body = 20 & segment_count_for_ends = 20 ! part attributes & part_name = .meca4bar.satellite1 & color = RED & visibility = on & name_visibility = off & size_of_icons = 5.0 ! !--------------------------------- couronne1 ----------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.couronne1 & adams_id = 29 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.couronne1 ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.couronne1.MARKER_134 & adams_id = 134 & location = 520.0, -75.0, -75.0 & orientation = 270.0d, 90.0d, 90.0d ! marker attributes & marker_name = .meca4bar.couronne1.MARKER_134 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.couronne1.cm & adams_id = 192 & location = 535.0, -75.0, -75.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.couronne1.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.couronne1.MARKER_151 & adams_id = 151 & location = 550.0, -75.0, -75.0 & orientation = 90.0d, 90.0d, 270.0d ! marker attributes & marker_name = .meca4bar.couronne1.MARKER_151 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.couronne1.MARKER_165 & adams_id = 165 & location = 532.5, -75.0, -75.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.couronne1.MARKER_165 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.couronne1.MARKER_167 & adams_id = 167 & location = 532.5, -75.0, -75.0 & orientation = 90.0d, 90.0d, 0.0d ! marker attributes & marker_name = .meca4bar.couronne1.MARKER_167 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.couronne1.MARKER_169 & adams_id = 169 & location = 572.5, -75.0, -75.0 & orientation = 90.0d, 90.0d, 0.0d ! marker attributes & marker_name = .meca4bar.couronne1.MARKER_169 & visibility = on & size_of_icons = 5.0 ! part create rigid_body mass_properties & part_name = .meca4bar.couronne1 & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape cylinder & cylinder_name = .meca4bar.couronne1.CYLINDER_54 & adams_id = 54 & center_marker = .meca4bar.couronne1.MARKER_134 & angle_extent = 360.0 & length = 10.0 & radius = 25.5 & side_count_for_body = 20 & segment_count_for_ends = 20 ! geometry attributes & geometry_name = .meca4bar.couronne1.CYLINDER_54 & render = wireframe ! geometry create shape cylinder & cylinder_name = .meca4bar.couronne1.CYLINDER_70 & adams_id = 70 & center_marker = .meca4bar.couronne1.MARKER_151 & angle_extent = 360.0 & length = 10.0 & radius = 25.5 & side_count_for_body = 20 & segment_count_for_ends = 20 ! geometry attributes & geometry_name = .meca4bar.couronne1.CYLINDER_70 & render = wireframe ! part attributes & part_name = .meca4bar.couronne1 & color = CYAN & visibility = on & name_visibility = off & size_of_icons = 5.0 ! !--------------------------------- satellite2 ---------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.satellite2 & adams_id = 27 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.satellite2 ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.satellite2.MARKER_132 & adams_id = 132 & location = 560.0, -58.0, -75.0 & orientation = 270.0d, 90.0d, 90.0d ! marker attributes & marker_name = .meca4bar.satellite2.MARKER_132 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.satellite2.cm & adams_id = 190 & location = 555.0, -58.0, -75.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.satellite2.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.satellite2.MARKER_177 & adams_id = 177 & location = 572.5, -58.0, -75.0 & orientation = 90.0d, 90.0d, 0.0d ! marker attributes & marker_name = .meca4bar.satellite2.MARKER_177 & visibility = on ! part create rigid_body mass_properties & part_name = .meca4bar.satellite2 & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape cylinder & cylinder_name = .meca4bar.satellite2.CYLINDER_52 & adams_id = 52 & center_marker = .meca4bar.satellite2.MARKER_132 & angle_extent = 360.0 & length = 10.0 & radius = 8.5 & side_count_for_body = 20 & segment_count_for_ends = 20 ! part attributes & part_name = .meca4bar.satellite2 & color = GREEN & visibility = on & name_visibility = off & size_of_icons = 5.0 ! !----------------------------------- moteur -----------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.moteur & adams_id = 35 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 0.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.moteur ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.moteur.MARKER_204 & adams_id = 204 & location = 500.0, -75.0, -75.0 & orientation = 270.0d, 90.0d, 90.0d ! marker attributes & marker_name = .meca4bar.moteur.MARKER_204 & visibility = on ! marker create & marker_name = .meca4bar.moteur.cm & adams_id = 206 & location = 300.0, -75.0, -75.0 & orientation = 0.0d, 0.0d, 0.0d ! marker attributes & marker_name = .meca4bar.moteur.cm & visibility = on ! marker create & marker_name = .meca4bar.moteur.MARKER_207 & adams_id = 207 & location = 500.0, -145.6187820219, -75.0 & orientation = 180.0d, 90.0d, 180.0d ! marker attributes & marker_name = .meca4bar.moteur.MARKER_207 & visibility = on ! part create rigid_body mass_properties & part_name = .meca4bar.moteur & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape cylinder & cylinder_name = .meca4bar.moteur.CYLINDER_85 & adams_id = 85 & center_marker = .meca4bar.moteur.MARKER_204 & angle_extent = 360.0 & length = 400.0 & radius = 65.0 & side_count_for_body = 20 & segment_count_for_ends = 20 ! part attributes & part_name = .meca4bar.moteur & color = Gray & visibility = on & name_visibility = off ! !--------------------------------- Portesat1 ----------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.Portesat1 & adams_id = 33 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 90.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.Portesat1 ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.Portesat1.MARKER_148 & adams_id = 148 & location = 550.0, -75.0, 75.0 & orientation = 90.0d, 90.0d, 270.0d ! marker attributes & marker_name = .meca4bar.Portesat1.MARKER_148 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Portesat1.MARKER_140 & adams_id = 140 & location = 532.5, -75.0, 58.0 & orientation = 270.0d, 90.0d, 90.0d ! marker attributes & marker_name = .meca4bar.Portesat1.MARKER_140 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Portesat1.MARKER_141 & adams_id = 141 & location = 532.5, -75.0, 75.0 & orientation = 270.0d, 90.0d, 90.0d ! marker attributes & marker_name = .meca4bar.Portesat1.MARKER_141 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Portesat1.cm & adams_id = 194 & location = 545.3306691807, -75.0, 71.4150668823 & orientation = 270.0000000053d, 26.2052470356d, 89.9999999957d ! marker attributes & marker_name = .meca4bar.Portesat1.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Portesat1.MARKER_146 & adams_id = 146 & location = 532.5, -75.0, 58.0 & orientation = 270.0d, 90.0d, 90.0d ! marker attributes & marker_name = .meca4bar.Portesat1.MARKER_146 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Portesat1.MARKER_147 & adams_id = 147 & location = 532.5, -75.0, 75.0 & orientation = 90.0d, 90.0d, 270.0d ! marker attributes & marker_name = .meca4bar.Portesat1.MARKER_147 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Portesat1.MARKER_168 & adams_id = 168 & location = 532.5, -75.0, 75.0 & orientation = 90.0d, 90.0d, 270.0d ! marker attributes & marker_name = .meca4bar.Portesat1.MARKER_168 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Portesat1.MARKER_172 & adams_id = 172 & location = 532.5, -75.0, 58.0 & orientation = 90.0d, 90.0d, 270.0d ! marker attributes & marker_name = .meca4bar.Portesat1.MARKER_172 & visibility = on ! marker create & marker_name = .meca4bar.Portesat1.MARKER_173 & adams_id = 173 & location = 532.5, -75.0, 75.0 & orientation = 90.0d, 90.0d, 270.0d ! marker attributes & marker_name = .meca4bar.Portesat1.MARKER_173 & visibility = on ! marker create & marker_name = .meca4bar.Portesat1.MARKER_183 & adams_id = 183 & location = 515.0, -75.0, 49.5 & orientation = 180.0d, 90.0d, 180.0d ! marker attributes & marker_name = .meca4bar.Portesat1.MARKER_183 & visibility = on ! marker create & marker_name = .meca4bar.Portesat1.MARKER_184 & adams_id = 184 & location = 515.0, -75.0, 66.5 & orientation = 180.0d, 90.0d, 180.0d ! marker attributes & marker_name = .meca4bar.Portesat1.MARKER_184 & visibility = on ! marker create & marker_name = .meca4bar.Portesat1.MARKER_180 & adams_id = 180 & location = 510.0, -75.0, 75.0 & orientation = 90.0d, 90.0d, 270.0d ! marker attributes & marker_name = .meca4bar.Portesat1.MARKER_180 & visibility = on ! marker create & marker_name = .meca4bar.Portesat1.MARKER_181 & adams_id = 181 & location = 550.0, -75.0, 75.0 & orientation = 90.0d, 90.0d, 270.0d ! marker attributes & marker_name = .meca4bar.Portesat1.MARKER_181 & visibility = on ! part create rigid_body mass_properties & part_name = .meca4bar.Portesat1 & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape link & link_name = .meca4bar.Portesat1.LINK_57 & i_marker = .meca4bar.Portesat1.MARKER_140 & j_marker = .meca4bar.Portesat1.MARKER_141 & width = 10.0 & depth = 5.0 ! geometry create shape cylinder & cylinder_name = .meca4bar.Portesat1.CYLINDER_62 & adams_id = 62 & center_marker = .meca4bar.Portesat1.MARKER_146 & angle_extent = 360.0 & length = 12.5 & radius = 2.5 & side_count_for_body = 20 & segment_count_for_ends = 20 ! geometry create shape cylinder & cylinder_name = .meca4bar.Portesat1.CYLINDER_63 & adams_id = 63 & center_marker = .meca4bar.Portesat1.MARKER_147 & angle_extent = 360.0 & length = 17.5 & radius = 2.5 & side_count_for_body = 20 & segment_count_for_ends = 20 ! geometry create shape cylinder & cylinder_name = .meca4bar.Portesat1.CYLINDER_64 & adams_id = 64 & center_marker = .meca4bar.Portesat1.MARKER_148 & angle_extent = 360.0 & length = 10.0 & radius = 8.5 & side_count_for_body = 20 & segment_count_for_ends = 20 ! part attributes & part_name = .meca4bar.Portesat1 & color = MAGENTA & visibility = on & name_visibility = off & size_of_icons = 5.0 ! !--------------------------------- Portesat2 ----------------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! part create rigid_body name_and_position & part_name = .meca4bar.Portesat2 & adams_id = 32 & location = 0.0, 0.0, 0.0 & orientation = 0.0d, 90.0d, 0.0d ! defaults coordinate_system & default_coordinate_system = .meca4bar.Portesat2 ! ! ****** Markers for current part ****** ! marker create & marker_name = .meca4bar.Portesat2.MARKER_149 & adams_id = 149 & location = 572.5, -75.0, 58.0 & orientation = 270.0d, 90.0d, 90.0d ! marker attributes & marker_name = .meca4bar.Portesat2.MARKER_149 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Portesat2.MARKER_138 & adams_id = 138 & location = 572.5, -75.0, 58.0 & orientation = 270.0d, 90.0d, 90.0d ! marker attributes & marker_name = .meca4bar.Portesat2.MARKER_138 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Portesat2.MARKER_139 & adams_id = 139 & location = 572.5, -75.0, 75.0 & orientation = 270.0d, 90.0d, 90.0d ! marker attributes & marker_name = .meca4bar.Portesat2.MARKER_139 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Portesat2.cm & adams_id = 193 & location = 875.0975498582, -75.0, 74.7249946015 & orientation = 270.0d, 0.1638531495d, 90.0d ! marker attributes & marker_name = .meca4bar.Portesat2.cm & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Portesat2.MARKER_170 & adams_id = 170 & location = 572.5, -75.0, 75.0 & orientation = 90.0d, 90.0d, 270.0d ! marker attributes & marker_name = .meca4bar.Portesat2.MARKER_170 & visibility = on & size_of_icons = 5.0 ! marker create & marker_name = .meca4bar.Portesat2.MARKER_185 & adams_id = 185 & location = 555.0, -75.0, 49.5 & orientation = 180.0d, 90.0d, 180.0d ! marker attributes & marker_name = .meca4bar.Portesat2.MARKER_185 & visibility = on ! marker create & marker_name = .meca4bar.Portesat2.MARKER_175 & adams_id = 175 & location = 572.5, -75.0, 75.0 & orientation = 90.0d, 90.0d, 270.0d ! marker attributes & marker_name = .meca4bar.Portesat2.MARKER_175 & visibility = on ! marker create & marker_name = .meca4bar.Portesat2.MARKER_178 & adams_id = 178 & location = 572.5, -75.0, 58.0 & orientation = 90.0d, 90.0d, 270.0d ! marker attributes & marker_name = .meca4bar.Portesat2.MARKER_178 & visibility = on ! marker create & marker_name = .meca4bar.Portesat2.MARKER_182 & adams_id = 182 & location = 550.0, -75.0, 75.0 & orientation = 90.0d, 90.0d, 270.0d ! marker attributes & marker_name = .meca4bar.Portesat2.MARKER_182 & visibility = on ! marker create & marker_name = .meca4bar.Portesat2.MARKER_186 & adams_id = 186 & location = 555.0, -75.0, 66.5 & orientation = 180.0d, 90.0d, 180.0d ! marker attributes & marker_name = .meca4bar.Portesat2.MARKER_186 & visibility = on ! marker create & marker_name = .meca4bar.Portesat2.MARKER_200 & adams_id = 200 & location = 1070.0, -75.0, 75.0 & orientation = 90.0d, 90.0d, 270.0d ! marker attributes & marker_name = .meca4bar.Portesat2.MARKER_200 & visibility = on ! marker create & marker_name = .meca4bar.Portesat2.MARKER_201 & adams_id = 201 & location = 1070.0, -75.0, 75.0 & orientation = 270.0d, 90.0d, 90.0d ! marker attributes & marker_name = .meca4bar.Portesat2.MARKER_201 & visibility = on ! part create rigid_body mass_properties & part_name = .meca4bar.Portesat2 & material_type = .meca4bar.steel ! ! ****** Graphics for current part ****** ! geometry create shape link & link_name = .meca4bar.Portesat2.LINK_57 & i_marker = .meca4bar.Portesat2.MARKER_138 & j_marker = .meca4bar.Portesat2.MARKER_139 & width = 10.0 & depth = 5.0 ! geometry attributes & geometry_name = .meca4bar.Portesat2.LINK_57 & render = wireframe ! geometry create shape cylinder & cylinder_name = .meca4bar.Portesat2.CYLINDER_65 & adams_id = 65 & center_marker = .meca4bar.Portesat2.MARKER_149 & angle_extent = 360.0 & length = 12.5 & radius = 2.5 & side_count_for_body = 20 & segment_count_for_ends = 20 ! geometry attributes & geometry_name = .meca4bar.Portesat2.CYLINDER_65 & render = wireframe ! geometry create shape frustum & frustum_name = .meca4bar.Portesat2.FRUSTUM_80 & adams_id = 80 & center_marker = .meca4bar.Portesat2.MARKER_200 & angle_extent = 360.0 & length = 10.0 & top_radius = 15.0 & bottom_radius = 25.0 & side_count_for_body = 20 & segment_count_for_ends = 20 ! geometry attributes & geometry_name = .meca4bar.Portesat2.FRUSTUM_80 & render = wireframe ! geometry create shape cylinder & cylinder_name = .meca4bar.Portesat2.CYLINDER_82 & adams_id = 82 & center_marker = .meca4bar.Portesat2.MARKER_201 & angle_extent = 360.0 & length = 497.5 & radius = 5.0 & side_count_for_body = 20 & segment_count_for_ends = 20 ! geometry attributes & geometry_name = .meca4bar.Portesat2.CYLINDER_82 & render = wireframe ! part attributes & part_name = .meca4bar.Portesat2 & color = DkOliveGreen & visibility = on & name_visibility = off & size_of_icons = 5.0 ! !----------------------------------- Joints -----------------------------------! ! ! constraint create joint revolute & joint_name = .meca4bar.PivotBalancier1_bati & adams_id = 18 & i_marker_name = .meca4bar.balancier1.MARKER_73 & j_marker_name = .meca4bar.bati.MARKER_74 ! constraint attributes & constraint_name = .meca4bar.PivotBalancier1_bati & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint fixed & joint_name = .meca4bar.Encastr_axebal2_bal2 & adams_id = 23 & i_marker_name = .meca4bar.Balancier2.MARKER_97 & j_marker_name = .meca4bar.axepivotbalancierps1.MARKER_98 ! constraint attributes & constraint_name = .meca4bar.Encastr_axebal2_bal2 & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint revolute & joint_name = .meca4bar.Pivot_bati_bal1 & adams_id = 24 & i_marker_name = .meca4bar.bati.MARKER_99 & j_marker_name = .meca4bar.axepivotbalancierps1.MARKER_100 ! constraint attributes & constraint_name = .meca4bar.Pivot_bati_bal1 & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint revolute & joint_name = .meca4bar.Pivot_bielle2_bal2 & adams_id = 25 & i_marker_name = .meca4bar.bielle2.MARKER_101 & j_marker_name = .meca4bar.Balancier2.MARKER_102 ! constraint attributes & constraint_name = .meca4bar.Pivot_bielle2_bal2 & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint fixed & joint_name = .meca4bar.encastrbatiground & adams_id = 5 & i_marker_name = .meca4bar.bati.MARKER_19 & j_marker_name = .meca4bar.ground.MARKER_20 ! constraint attributes & constraint_name = .meca4bar.encastrbatiground & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint fixed & joint_name = .meca4bar.encastr_man1_man2 & adams_id = 26 & i_marker_name = .meca4bar.manivelle1.MARKER_105 & j_marker_name = .meca4bar.manivelle2.MARKER_106 ! constraint attributes & constraint_name = .meca4bar.encastr_man1_man2 & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint revolute & joint_name = .meca4bar.Pivot_bielle2_man2 & adams_id = 27 & i_marker_name = .meca4bar.bielle2.MARKER_107 & j_marker_name = .meca4bar.manivelle2.MARKER_108 ! constraint attributes & constraint_name = .meca4bar.Pivot_bielle2_man2 & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint fixed & joint_name = .meca4bar.Encastr_Essuied_bal1 & adams_id = 22 & i_marker_name = .meca4bar.essuied.MARKER_81 & j_marker_name = .meca4bar.balancier1.MARKER_82 ! constraint attributes & constraint_name = .meca4bar.Encastr_Essuied_bal1 & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint revolute & joint_name = .meca4bar.Pivot_bielle1_man1 & adams_id = 28 & i_marker_name = .meca4bar.manivelle1.MARKER_109 & j_marker_name = .meca4bar.bielle1.MARKER_110 ! constraint attributes & constraint_name = .meca4bar.Pivot_bielle1_man1 & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint revolute & joint_name = .meca4bar.PivotManivelleBati & adams_id = 29 & i_marker_name = .meca4bar.manivelle1.MARKER_117 & j_marker_name = .meca4bar.ground.MARKER_118 ! constraint attributes & constraint_name = .meca4bar.PivotManivelleBati & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint fixed & joint_name = .meca4bar.Encastr_parebrise_sol & adams_id = 17 & i_marker_name = .meca4bar.Pare_brise.MARKER_65 & j_marker_name = .meca4bar.ground.MARKER_66 ! constraint attributes & constraint_name = .meca4bar.Encastr_parebrise_sol & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint revolute & joint_name = .meca4bar.Pivot_bielle1_bal1 & adams_id = 30 & i_marker_name = .meca4bar.bielle1.MARKER_119 & j_marker_name = .meca4bar.balancier1.MARKER_120 ! constraint attributes & constraint_name = .meca4bar.Pivot_bielle1_bal1 & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint fixed & joint_name = .meca4bar.Encastr_essuieg_bal1 & adams_id = 31 & i_marker_name = .meca4bar.essuieg.MARKER_121 & j_marker_name = .meca4bar.axepivotbalancierps1.MARKER_122 ! constraint attributes & constraint_name = .meca4bar.Encastr_essuieg_bal1 & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint planar & joint_name = .meca4bar.Plan_essuied_pare_brise & adams_id = 32 & i_marker_name = .meca4bar.essuied.MARKER_125 & j_marker_name = .meca4bar.Pare_brise.MARKER_126 ! constraint attributes & constraint_name = .meca4bar.Plan_essuied_pare_brise & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint planar & joint_name = .meca4bar.Plan_essuieg_pare_brise & adams_id = 33 & i_marker_name = .meca4bar.essuieg.MARKER_127 & j_marker_name = .meca4bar.Pare_brise.MARKER_128 ! constraint attributes & constraint_name = .meca4bar.Plan_essuieg_pare_brise & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint fixed & joint_name = .meca4bar.EncastrementCouronneGround & adams_id = 34 & i_marker_name = .meca4bar.couronne1.MARKER_165 & j_marker_name = .meca4bar.ground.MARKER_166 ! constraint attributes & constraint_name = .meca4bar.EncastrementCouronneGround & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint revolute & joint_name = .meca4bar.PivotCouronnePortesat1 & adams_id = 35 & i_marker_name = .meca4bar.couronne1.MARKER_167 & j_marker_name = .meca4bar.Portesat1.MARKER_168 ! constraint attributes & constraint_name = .meca4bar.PivotCouronnePortesat1 & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint revolute & joint_name = .meca4bar.PivotCouronnePortesat2 & adams_id = 36 & i_marker_name = .meca4bar.couronne1.MARKER_169 & j_marker_name = .meca4bar.Portesat2.MARKER_170 ! constraint attributes & constraint_name = .meca4bar.PivotCouronnePortesat2 & visibility = on & name_visibility = off & size_of_icons = 5.0 ! constraint create joint revolute & joint_name = .meca4bar.PivotSat1Portesat1 & adams_id = 37 & i_marker_name = .meca4bar.satellite1.MARKER_171 & j_marker_name = .meca4bar.Portesat1.MARKER_172 ! constraint attributes & constraint_name = .meca4bar.PivotSat1Portesat1 & visibility = on & name_visibility = off ! constraint create joint revolute & joint_name = .meca4bar.PivotPortsat1Ground & adams_id = 38 & i_marker_name = .meca4bar.Portesat1.MARKER_173 & j_marker_name = .meca4bar.ground.MARKER_174 ! constraint attributes & constraint_name = .meca4bar.PivotPortsat1Ground & visibility = on & name_visibility = off ! constraint create joint revolute & joint_name = .meca4bar.PivotPortesat2Ground & adams_id = 39 & i_marker_name = .meca4bar.Portesat2.MARKER_175 & j_marker_name = .meca4bar.ground.MARKER_176 ! constraint attributes & constraint_name = .meca4bar.PivotPortesat2Ground & visibility = on & name_visibility = off ! constraint create joint revolute & joint_name = .meca4bar.PivotSat2Portesat2 & adams_id = 40 & i_marker_name = .meca4bar.satellite2.MARKER_177 & j_marker_name = .meca4bar.Portesat2.MARKER_178 ! constraint attributes & constraint_name = .meca4bar.PivotSat2Portesat2 & visibility = on & name_visibility = off ! constraint create joint revolute & joint_name = .meca4bar.PivotPlanetaire1Portesat1 & adams_id = 41 & i_marker_name = .meca4bar.Planetaire1.MARKER_179 & j_marker_name = .meca4bar.Portesat1.MARKER_180 ! constraint attributes & constraint_name = .meca4bar.PivotPlanetaire1Portesat1 & visibility = on & name_visibility = off ! constraint create joint revolute & joint_name = .meca4bar.PivotPortesat1Portesat2 & adams_id = 42 & i_marker_name = .meca4bar.Portesat1.MARKER_181 & j_marker_name = .meca4bar.Portesat2.MARKER_182 ! constraint attributes & constraint_name = .meca4bar.PivotPortesat1Portesat2 & visibility = on & name_visibility = off ! constraint create joint revolute & joint_name = .meca4bar.PivotPlanetaire1Bati & adams_id = 43 & i_marker_name = .meca4bar.Planetaire1.MARKER_195 & j_marker_name = .meca4bar.ground.MARKER_196 ! constraint attributes & constraint_name = .meca4bar.PivotPlanetaire1Bati & visibility = on & name_visibility = off ! constraint create joint fixed & joint_name = .meca4bar.Encastr_moteur_bati & adams_id = 44 & i_marker_name = .meca4bar.moteur.MARKER_207 & j_marker_name = .meca4bar.ground.MARKER_208 ! constraint attributes & constraint_name = .meca4bar.Encastr_moteur_bati & visibility = on & name_visibility = off ! constraint create joint fixed & joint_name = .meca4bar.JOINT_45 & adams_id = 45 & i_marker_name = .meca4bar.boite.MARKER_211 & j_marker_name = .meca4bar.ground.MARKER_212 ! constraint attributes & constraint_name = .meca4bar.JOINT_45 & visibility = on & name_visibility = off ! !----------------------------------- Forces -----------------------------------! ! ! force create element_like friction & friction_name = .meca4bar.FRICTION_1 & adams_id = 1 & joint_name = .meca4bar.PivotManivelleBati & mu_static = 0.5 & mu_dynamic = 0.3 & friction_arm = 1.0 & bending_reaction_arm = 1.0 & pin_radius = 1.0 & stiction_transition_velocity = 0.1 & max_stiction_deformation = 1.0E-002 & friction_torque_preload = 0.0 & effect = all & inactive_during_static = off ! !----------------------------------- Gears ------------------------------------! ! ! constraint create complex_joint gear & gear_name = .meca4bar.GEAR_1Planetaire1Sat1 & adams_id = 1 & joint_name = & .meca4bar.PivotPlanetaire1Portesat1, & .meca4bar.PivotSat1Portesat1 & common_velocity_marker = .meca4bar.Portesat1.MARKER_184 ! constraint create complex_joint gear & gear_name = .meca4bar.GEAR_2Sat1Couronne & adams_id = 2 & joint_name = & .meca4bar.PivotSat1Portesat1, & .meca4bar.PivotCouronnePortesat1 & common_velocity_marker = .meca4bar.Portesat1.MARKER_183 ! constraint create complex_joint gear & gear_name = .meca4bar.GEAR_3Portesat1Sat2 & adams_id = 3 & joint_name = & .meca4bar.PivotPortesat1Portesat2, & .meca4bar.PivotSat2Portesat2 & common_velocity_marker = .meca4bar.Portesat2.MARKER_186 ! constraint create complex_joint gear & gear_name = .meca4bar.GEAR_4Sat2Couronne & adams_id = 4 & joint_name = & .meca4bar.PivotSat2Portesat2, & .meca4bar.PivotCouronnePortesat2 & common_velocity_marker = .meca4bar.Portesat2.MARKER_185 ! constraint create complex_joint gear & gear_name = .meca4bar.GEAR_5_Conique & adams_id = 5 & joint_name = & .meca4bar.PivotManivelleBati, & .meca4bar.PivotPortesat2Ground & common_velocity_marker = .meca4bar.ground.MARKER_202 ! !-------------------------- Adams/View UDE Instances --------------------------! ! ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! undo begin_block suppress = yes ! ude create instance & instance_name = .meca4bar.general_motion_1 & definition_name = .MDI.Constraints.general_motion & location = 0.0, 0.0, 0.0 & orientation = 0.0, 0.0, 0.0 ! ude create instance & instance_name = .meca4bar.general_motion_2 & definition_name = .MDI.Constraints.general_motion & location = 0.0, 0.0, 0.0 & orientation = 0.0, 0.0, 0.0 ! !-------------------------- Adams/View UDE Instance ---------------------------! ! ! variable modify & variable_name = .meca4bar.general_motion_1.i_marker & object_value = (.meca4bar.Planetaire1.MARKER_195) ! variable modify & variable_name = .meca4bar.general_motion_1.j_marker & object_value = (.meca4bar.ground.MARKER_196) ! variable modify & variable_name = .meca4bar.general_motion_1.constraint & object_value = (.meca4bar.PivotPlanetaire1Bati) ! variable modify & variable_name = .meca4bar.general_motion_1.t1_type & integer_value = 0 ! variable modify & variable_name = .meca4bar.general_motion_1.t2_type & integer_value = 0 ! variable modify & variable_name = .meca4bar.general_motion_1.t3_type & integer_value = 0 ! variable modify & variable_name = .meca4bar.general_motion_1.r1_type & integer_value = 0 ! variable modify & variable_name = .meca4bar.general_motion_1.r2_type & integer_value = 0 ! variable modify & variable_name = .meca4bar.general_motion_1.r3_type & integer_value = 2 ! variable modify & variable_name = .meca4bar.general_motion_1.t1_func & string_value = "0 * time" ! variable modify & variable_name = .meca4bar.general_motion_1.t2_func & string_value = "0 * time" ! variable modify & variable_name = .meca4bar.general_motion_1.t3_func & string_value = "0 * time" ! variable modify & variable_name = .meca4bar.general_motion_1.r1_func & string_value = "0 * time" ! variable modify & variable_name = .meca4bar.general_motion_1.r2_func & string_value = "0 * time" ! variable modify & variable_name = .meca4bar.general_motion_1.r3_func & string_value = "-1200*Pi/30" ! variable modify & variable_name = .meca4bar.general_motion_1.t1_ic_disp & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_1.t2_ic_disp & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_1.t3_ic_disp & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_1.r1_ic_disp & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_1.r2_ic_disp & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_1.r3_ic_disp & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_1.t1_ic_velo & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_1.t2_ic_velo & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_1.t3_ic_velo & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_1.r1_ic_velo & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_1.r2_ic_velo & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_1.r3_ic_velo & real_value = 0.0 ! ude modify instance & instance_name = .meca4bar.general_motion_1 ! !-------------------------- Adams/View UDE Instance ---------------------------! ! ! variable modify & variable_name = .meca4bar.general_motion_2.i_marker & object_value = (.meca4bar.couronne1.MARKER_167) ! variable modify & variable_name = .meca4bar.general_motion_2.j_marker & object_value = (.meca4bar.Portesat1.MARKER_168) ! variable modify & variable_name = .meca4bar.general_motion_2.constraint & object_value = (.meca4bar.PivotCouronnePortesat1) ! variable modify & variable_name = .meca4bar.general_motion_2.t1_type & integer_value = 0 ! variable modify & variable_name = .meca4bar.general_motion_2.t2_type & integer_value = 0 ! variable modify & variable_name = .meca4bar.general_motion_2.t3_type & integer_value = 0 ! variable modify & variable_name = .meca4bar.general_motion_2.r1_type & integer_value = 0 ! variable modify & variable_name = .meca4bar.general_motion_2.r2_type & integer_value = 0 ! variable modify & variable_name = .meca4bar.general_motion_2.r3_type & integer_value = 0 ! variable modify & variable_name = .meca4bar.general_motion_2.t1_func & string_value = "0 * time" ! variable modify & variable_name = .meca4bar.general_motion_2.t2_func & string_value = "0 * time" ! variable modify & variable_name = .meca4bar.general_motion_2.t3_func & string_value = "0 * time" ! variable modify & variable_name = .meca4bar.general_motion_2.r1_func & string_value = "0 * time" ! variable modify & variable_name = .meca4bar.general_motion_2.r2_func & string_value = "0 * time" ! variable modify & variable_name = .meca4bar.general_motion_2.r3_func & string_value = "0 * time" ! variable modify & variable_name = .meca4bar.general_motion_2.t1_ic_disp & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_2.t2_ic_disp & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_2.t3_ic_disp & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_2.r1_ic_disp & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_2.r2_ic_disp & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_2.r3_ic_disp & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_2.t1_ic_velo & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_2.t2_ic_velo & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_2.t3_ic_velo & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_2.r1_ic_velo & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_2.r2_ic_velo & real_value = 0.0 ! variable modify & variable_name = .meca4bar.general_motion_2.r3_ic_velo & real_value = 0.0 ! ude modify instance & instance_name = .meca4bar.general_motion_2 ! undo end_block ! !---------------------------------- Accgrav -----------------------------------! ! ! force create body gravitational & gravity_field_name = gravity & x_component_gravity = 0.0 & y_component_gravity = -9806.65 & z_component_gravity = 0.0 ! force attributes & force_name = gravity & size_of_icons = 5.0 ! !----------------------------- Analysis settings ------------------------------! ! ! executive_control set kinematics_parameters & model_name = meca4bar & tlimit = 1.0E+010 ! !---------------------------------- Measures ----------------------------------! ! ! measure create angle & measure_name = .meca4bar.MEA_angle_essuiegd & first_point = .meca4bar.essuied.MARKER_55 & middle_point = .meca4bar.bati.MARKER_2 & last_point = .meca4bar.bati.cm ! data_element attributes & data_element_name = .meca4bar.MEA_angle_essuiegd & color = WHITE ! measure create object & measure_name = .meca4bar.Planetaire1_Omega_e & from_first = yes & object = .meca4bar.Planetaire1 & characteristic = cm_position & component = x_component & create_measure_display = no ! data_element attributes & data_element_name = .meca4bar.Planetaire1_Omega_e & color = WHITE ! measure create object & measure_name = .meca4bar.manivelle2_Omega_s & from_first = yes & object = .meca4bar.manivelle2 & characteristic = cm_angular_velocity & component = z_component & create_measure_display = no ! data_element attributes & data_element_name = .meca4bar.manivelle2_Omega_s & color = WHITE ! measure create object & measure_name = .meca4bar.PivotManivelleBati_Cs & from_first = yes & object = .meca4bar.PivotManivelleBati & characteristic = element_torque & component = z_component & create_measure_display = no ! data_element attributes & data_element_name = .meca4bar.PivotManivelleBati_Cs & color = WHITE ! measure create object & measure_name = .meca4bar.PivotPlanetaire1Bati_Ce & from_first = yes & object = .meca4bar.PivotPlanetaire1Bati & characteristic = element_torque & component = x_component & create_measure_display = no ! data_element attributes & data_element_name = .meca4bar.PivotPlanetaire1Bati_Ce & color = WHITE ! !---------------------------- ADAMS/View Variables ----------------------------! ! ! variable create & variable_name = .meca4bar.Cs2 & units = "torque" & range = -1.0, 1.0 & use_allowed_values = no & delta_type = relative & real_value = 0.0 ! !----------------------------- Simulation Scripts -----------------------------! ! ! simulation script create & sim_script_name = .meca4bar.Last_Sim & commands = & "simulation single_run transient type=auto_select end_time=1.0 number_of_steps=150 model_name=.meca4bar initial_static=no" ! !---------------------------- Function definitions ----------------------------! ! ! !-------------------------- Adams/View UDE Instance ---------------------------! ! ! ude modify instance & instance_name = .meca4bar.general_motion_1 ! !-------------------------- Adams/View UDE Instance ---------------------------! ! ! ude modify instance & instance_name = .meca4bar.general_motion_2 ! !--------------------------- Expression definitions ---------------------------! ! ! defaults coordinate_system & default_coordinate_system = ground ! marker modify & marker_name = .meca4bar.ground.MARKER_20 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Pt_B)) ! marker modify & marker_name = .meca4bar.ground.MARKER_66 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.POINT_1)) ! marker modify & marker_name = .meca4bar.ground.MARKER_166 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS12)) ! marker modify & marker_name = .meca4bar.ground.MARKER_174 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS12)) ! marker modify & marker_name = .meca4bar.ground.MARKER_176 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS22)) ! marker modify & marker_name = .meca4bar.ground.MARKER_196 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.P11)) ! marker modify & marker_name = .meca4bar.ground.MARKER_202 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Pt_Ec12)) ! marker modify & marker_name = .meca4bar.ground.MARKER_118 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Pt_A)) ! marker modify & marker_name = .meca4bar.ground.MARKER_212 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Pt_min)) ! marker modify & marker_name = .meca4bar.bati.MARKER_1 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS1)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PS1, .meca4bar.ground.PS2, "X")) & relative_to = .meca4bar.bati ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.bati.MARKER_2 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS2)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PS1, .meca4bar.ground.PS2, "X")) & relative_to = .meca4bar.bati ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape link & link_name = .meca4bar.bati.LINK_5 & width = (1cm) & depth = (0.5cm) ! marker modify & marker_name = .meca4bar.bati.MARKER_19 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Pt_B)) & relative_to = .meca4bar.bati ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.bati.MARKER_74 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS2)) & relative_to = .meca4bar.bati ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.bati.MARKER_99 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS1)) & relative_to = .meca4bar.bati ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.essuied.MARKER_54 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS2)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PS2, .meca4bar.ground.Ptextrem1, "X")) & relative_to = .meca4bar.essuied ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.essuied.MARKER_55 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Ptextrem1)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PS2, .meca4bar.ground.Ptextrem1, "X")) & relative_to = .meca4bar.essuied ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape link & link_name = .meca4bar.essuied.LINK_16 & width = (1cm) & depth = (0.5cm) ! marker modify & marker_name = .meca4bar.essuied.MARKER_81 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS2)) & relative_to = .meca4bar.essuied ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.essuied.MARKER_125 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Ptextrem1)) & relative_to = .meca4bar.essuied ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.essuieg.MARKER_59 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS1)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PS1, .meca4bar.ground.Ptextrem2, "X")) & relative_to = .meca4bar.essuieg ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.essuieg.MARKER_60 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Ptextrem2)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PS1, .meca4bar.ground.Ptextrem2, "X")) & relative_to = .meca4bar.essuieg ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape link & link_name = .meca4bar.essuieg.LINK_18 & width = (1cm) & depth = (0.5cm) ! marker modify & marker_name = .meca4bar.essuieg.MARKER_121 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS1)) & relative_to = .meca4bar.essuieg ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.essuieg.MARKER_127 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Ptextrem2)) & relative_to = .meca4bar.essuieg ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Pare_brise.MARKER_64 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.POINT_1)) & relative_to = .meca4bar.Pare_brise ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape plane & plane_name = .meca4bar.Pare_brise.PLANE_19 & x_minimum = (0.0mm) & x_maximum = (1400.0mm) & y_minimum = (0.0mm) & y_maximum = (800.0mm) ! marker modify & marker_name = .meca4bar.Pare_brise.MARKER_65 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.POINT_1)) & relative_to = .meca4bar.Pare_brise ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Pare_brise.MARKER_126 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Ptextrem1)) & relative_to = .meca4bar.Pare_brise ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Pare_brise.MARKER_128 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Ptextrem2)) & relative_to = .meca4bar.Pare_brise ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.balancier1.MARKER_67 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Pt_D)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.Pt_D, .meca4bar.ground.PtCmoin5, "X")) & relative_to = .meca4bar.balancier1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.balancier1.MARKER_68 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtCmoin5)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.Pt_D, .meca4bar.ground.PtCmoin5, "X")) & relative_to = .meca4bar.balancier1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape link & link_name = .meca4bar.balancier1.LINK_26 & width = (1cm) & depth = (0.5cm) ! marker modify & marker_name = .meca4bar.balancier1.MARKER_73 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS2)) & relative_to = .meca4bar.balancier1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.balancier1.MARKER_82 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS2)) & relative_to = .meca4bar.balancier1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.balancier1.MARKER_120 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtCmoin5)) & relative_to = .meca4bar.balancier1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.bielle1.MARKER_88 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtCmoin5)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PtCmoin5, .meca4bar.ground.PtBmoin5, "X")) & relative_to = .meca4bar.bielle1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.bielle1.MARKER_89 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtBmoin5)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PtCmoin5, .meca4bar.ground.PtBmoin5, "X")) & relative_to = .meca4bar.bielle1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape link & link_name = .meca4bar.bielle1.LINK_31 & width = (1cm) & depth = (0.5cm) ! marker modify & marker_name = .meca4bar.bielle1.MARKER_110 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtBmoin5)) & relative_to = .meca4bar.bielle1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.bielle1.MARKER_119 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtCmoin5)) & relative_to = .meca4bar.bielle1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.manivelle1.MARKER_90 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtBpmoin10)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PtBpmoin10, .meca4bar.ground.PtBmoin10, "X")) & relative_to = .meca4bar.manivelle1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.manivelle1.MARKER_91 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtBmoin10)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PtBpmoin10, .meca4bar.ground.PtBmoin10, "X")) & relative_to = .meca4bar.manivelle1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape link & link_name = .meca4bar.manivelle1.LINK_31 & width = (1cm) & depth = (0.5cm) ! marker modify & marker_name = .meca4bar.manivelle1.MARKER_105 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtAmoin15)) & relative_to = .meca4bar.manivelle1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.manivelle1.MARKER_109 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtBmoin5)) & relative_to = .meca4bar.manivelle1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.manivelle1.MARKER_117 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Pt_A)) & relative_to = .meca4bar.manivelle1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.bielle2.MARKER_92 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtBpmoin15)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PtBpmoin15, .meca4bar.ground.PtCpmoin15, "X")) & relative_to = .meca4bar.bielle2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.bielle2.MARKER_93 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtCpmoin15)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PtBpmoin15, .meca4bar.ground.PtCpmoin15, "X")) & relative_to = .meca4bar.bielle2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape link & link_name = .meca4bar.bielle2.LINK_32 & width = (1cm) & depth = (0.5cm) ! marker modify & marker_name = .meca4bar.bielle2.MARKER_101 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtCpmoin10)) & relative_to = .meca4bar.bielle2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.bielle2.MARKER_107 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtBpmoin15)) & relative_to = .meca4bar.bielle2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Balancier2.MARKER_94 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtCpmoin15)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PtCpmoin15, .meca4bar.ground.PtDpmoins15, "X")) & relative_to = .meca4bar.Balancier2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Balancier2.MARKER_95 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtDpmoins15)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PtCpmoin15, .meca4bar.ground.PtDpmoins15, "X")) & relative_to = .meca4bar.Balancier2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape link & link_name = .meca4bar.Balancier2.LINK_33 & width = (1cm) & depth = (0.5cm) ! marker modify & marker_name = .meca4bar.Balancier2.MARKER_97 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtDpmoins15)) & relative_to = .meca4bar.Balancier2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Balancier2.MARKER_102 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtCpmoin10)) & relative_to = .meca4bar.Balancier2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.axepivotbalancierps1.MARKER_96 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtDpmoins15)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PtDpmoins15, .meca4bar.ground.PS1, "Z")) & relative_to = .meca4bar.axepivotbalancierps1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape cylinder & cylinder_name = .meca4bar.axepivotbalancierps1.CYLINDER_34 & length = (15.0mm) ! marker modify & marker_name = .meca4bar.axepivotbalancierps1.MARKER_98 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtDpmoins15)) & relative_to = .meca4bar.axepivotbalancierps1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.axepivotbalancierps1.MARKER_100 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS1)) & relative_to = .meca4bar.axepivotbalancierps1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.axepivotbalancierps1.MARKER_122 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS1)) & relative_to = .meca4bar.axepivotbalancierps1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.manivelle2.MARKER_103 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtBpmoin20)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PtBpmoin20, .meca4bar.ground.PtBmoin20, "X")) & relative_to = .meca4bar.manivelle2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.manivelle2.MARKER_104 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtBmoin20)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PtBpmoin20, .meca4bar.ground.PtBmoin20, "X")) & relative_to = .meca4bar.manivelle2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape link & link_name = .meca4bar.manivelle2.LINK_36 & width = (1cm) & depth = (0.5cm) ! marker modify & marker_name = .meca4bar.manivelle2.MARKER_106 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtAmoin15)) & relative_to = .meca4bar.manivelle2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.manivelle2.MARKER_108 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PtBpmoin15)) & relative_to = .meca4bar.manivelle2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.manivelle2.MARKER_198 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Pt_Ec2)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.Pt_Ec2, .meca4bar.ground.Pt_Ec2p, "Z")) & relative_to = .meca4bar.manivelle2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape frustum & frustum_name = .meca4bar.manivelle2.FRUSTUM_74 & length = (1.0cm) & top_radius = (3.0cm) & bottom_radius = (2cm) ! marker modify & marker_name = .meca4bar.manivelle2.MARKER_199 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Pt_Ec2)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.Pt_Ec2, .meca4bar.ground.Pt_Amoins20, "Z")) & relative_to = .meca4bar.manivelle2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape cylinder & cylinder_name = .meca4bar.manivelle2.CYLINDER_77 & length = (70.0mm) & radius = (0.5cm) ! material modify & material_name = .meca4bar.glass & youngs_modulus = (4.62E+010(Newton/meter**2)) & density = (2595.0(kg/meter**3)) ! material modify & material_name = .meca4bar.aluminum & youngs_modulus = (7.1705E+010(Newton/meter**2)) & density = (2740.0(kg/meter**3)) ! marker modify & marker_name = .meca4bar.satellite1.MARKER_131 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.S12)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.S12, .meca4bar.ground.S11, "Z")) & relative_to = .meca4bar.satellite1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape cylinder & cylinder_name = .meca4bar.satellite1.CYLINDER_51 & length = (10.0mm) & radius = (0.85cm) ! marker modify & marker_name = .meca4bar.satellite1.MARKER_171 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS11)) & relative_to = .meca4bar.satellite1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.satellite2.MARKER_132 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.S22)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.S22, .meca4bar.ground.S21, "Z")) & relative_to = .meca4bar.satellite2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape cylinder & cylinder_name = .meca4bar.satellite2.CYLINDER_52 & length = (10.0mm) & radius = (0.85cm) ! marker modify & marker_name = .meca4bar.satellite2.MARKER_177 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS21)) & relative_to = .meca4bar.satellite2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Planetaire1.MARKER_133 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.P12)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.P12, .meca4bar.ground.P11, "Z")) & relative_to = .meca4bar.Planetaire1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape cylinder & cylinder_name = .meca4bar.Planetaire1.CYLINDER_53 & length = (10.0mm) & radius = (0.85cm) ! marker modify & marker_name = .meca4bar.Planetaire1.MARKER_150 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.P11)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.P11, .meca4bar.ground.Pt_E, "Z")) & relative_to = .meca4bar.Planetaire1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape cylinder & cylinder_name = .meca4bar.Planetaire1.CYLINDER_67 & length = (10.0mm) & radius = (0.25cm) ! marker modify & marker_name = .meca4bar.Planetaire1.MARKER_179 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.P11)) & relative_to = .meca4bar.Planetaire1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Planetaire1.MARKER_195 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.P11)) & relative_to = .meca4bar.Planetaire1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.couronne1.MARKER_134 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.P12)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.P12, .meca4bar.ground.P11, "Z")) & relative_to = .meca4bar.couronne1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape cylinder & cylinder_name = .meca4bar.couronne1.CYLINDER_54 & length = (10.0mm) & radius = (25.5mm) ! marker modify & marker_name = .meca4bar.couronne1.MARKER_151 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.P21)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.P21, .meca4bar.ground.P22, "Z")) & relative_to = .meca4bar.couronne1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape cylinder & cylinder_name = .meca4bar.couronne1.CYLINDER_70 & length = (10.0mm) & radius = (25.5mm) ! marker modify & marker_name = .meca4bar.couronne1.MARKER_165 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS12)) & relative_to = .meca4bar.couronne1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.couronne1.MARKER_167 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS12)) & relative_to = .meca4bar.couronne1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.couronne1.MARKER_169 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS22)) & relative_to = .meca4bar.couronne1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat2.MARKER_138 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS21)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PS21, .meca4bar.ground.PS22, "X")) & relative_to = .meca4bar.Portesat2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat2.MARKER_139 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS22)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PS21, .meca4bar.ground.PS22, "X")) & relative_to = .meca4bar.Portesat2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape link & link_name = .meca4bar.Portesat2.LINK_57 & width = (1cm) & depth = (0.5cm) ! marker modify & marker_name = .meca4bar.Portesat2.MARKER_149 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS21)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PS21, .meca4bar.ground.S22, "Z")) & relative_to = .meca4bar.Portesat2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape cylinder & cylinder_name = .meca4bar.Portesat2.CYLINDER_65 & length = (12.5mm) & radius = (0.25cm) ! marker modify & marker_name = .meca4bar.Portesat2.MARKER_170 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS22)) & relative_to = .meca4bar.Portesat2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat2.MARKER_175 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS22)) & relative_to = .meca4bar.Portesat2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat2.MARKER_178 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS21)) & relative_to = .meca4bar.Portesat2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat2.MARKER_182 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.P21)) & relative_to = .meca4bar.Portesat2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat2.MARKER_185 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.c22)) & relative_to = .meca4bar.Portesat2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat2.MARKER_186 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.c21)) & relative_to = .meca4bar.Portesat2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat2.MARKER_200 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Pt_Ec1p)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.Pt_Ec1p, .meca4bar.ground.Pt_Ec1, "Z")) & relative_to = .meca4bar.Portesat2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape frustum & frustum_name = .meca4bar.Portesat2.FRUSTUM_80 & length = (1.0cm) & top_radius = (1.5cm) & bottom_radius = (2.5cm) ! marker modify & marker_name = .meca4bar.Portesat2.MARKER_201 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Pt_Ec1p)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.Pt_Ec1p, .meca4bar.ground.PS22, "Z")) & relative_to = .meca4bar.Portesat2 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape cylinder & cylinder_name = .meca4bar.Portesat2.CYLINDER_82 & length = (497.5mm) & radius = (0.5cm) ! marker modify & marker_name = .meca4bar.Portesat1.MARKER_140 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS11)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PS11, .meca4bar.ground.PS12, "X")) & relative_to = .meca4bar.Portesat1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat1.MARKER_141 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS12)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PS11, .meca4bar.ground.PS12, "X")) & relative_to = .meca4bar.Portesat1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape link & link_name = .meca4bar.Portesat1.LINK_57 & width = (1cm) & depth = (0.5cm) ! marker modify & marker_name = .meca4bar.Portesat1.MARKER_146 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS11)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PS11, .meca4bar.ground.S12, "Z")) & relative_to = .meca4bar.Portesat1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape cylinder & cylinder_name = .meca4bar.Portesat1.CYLINDER_62 & length = (12.5mm) & radius = (0.25cm) ! marker modify & marker_name = .meca4bar.Portesat1.MARKER_147 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS12)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.PS12, .meca4bar.ground.P21, "Z")) & relative_to = .meca4bar.Portesat1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape cylinder & cylinder_name = .meca4bar.Portesat1.CYLINDER_63 & length = (17.5mm) & radius = (0.25cm) ! marker modify & marker_name = .meca4bar.Portesat1.MARKER_148 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.P21)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.P21, .meca4bar.ground.P22, "Z")) & relative_to = .meca4bar.Portesat1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape cylinder & cylinder_name = .meca4bar.Portesat1.CYLINDER_64 & length = (10.0mm) & radius = (0.85cm) ! marker modify & marker_name = .meca4bar.Portesat1.MARKER_168 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS12)) & relative_to = .meca4bar.Portesat1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat1.MARKER_172 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS11)) & relative_to = .meca4bar.Portesat1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat1.MARKER_173 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.PS12)) & relative_to = .meca4bar.Portesat1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat1.MARKER_180 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.P11)) & relative_to = .meca4bar.Portesat1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat1.MARKER_181 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.P21)) & relative_to = .meca4bar.Portesat1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat1.MARKER_183 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.c12)) & relative_to = .meca4bar.Portesat1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.Portesat1.MARKER_184 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.c11)) & relative_to = .meca4bar.Portesat1 ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! marker modify & marker_name = .meca4bar.moteur.MARKER_204 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Pt_E)) & orientation = & (ORI_ALONG_AXIS(.meca4bar.ground.Pt_E, .meca4bar.ground.Pt_moteur, "Z")) & relative_to = .meca4bar.moteur ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape cylinder & cylinder_name = .meca4bar.moteur.CYLINDER_85 & length = (400.0mm) & radius = (6.5cm) ! marker modify & marker_name = .meca4bar.boite.MARKER_209 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Pt_min)) & relative_to = .meca4bar.boite ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! geometry modify shape block & block_name = .meca4bar.boite.BOX_86 & diag_corner_coords = & (900.0mm), & (-150.0mm), & (150mm) ! marker modify & marker_name = .meca4bar.boite.MARKER_211 & location = & (LOC_RELATIVE_TO({0, 0, 0}, .meca4bar.ground.Pt_min)) & relative_to = .meca4bar.boite ! defaults coordinate_system & default_coordinate_system = .meca4bar.ground ! material modify & material_name = .meca4bar.steel & youngs_modulus = (2.07E+011(Newton/meter**2)) & density = (7801.0(kg/meter**3)) ! model display & model_name = meca4bar